I wasn't in the market for another Foundation, or a ny bass for that matter, but ...
This beautiful Foundation in natural mahogany with a rosewood fret board was for sale locally on Offer-Up and it ended up coming home with me for $300. You can still sometimes get them for low $200's but not this nice, and the prices seem to be rising. The guy wanted 4, so I was fine with 3. Its a nice instrument and a good addition to the collection.
One of the straightest bass necks I've ever seen. I was able to set the action super low with no buzz.
Rosewood fret board. These seem to be less common than the maples. It is super smooth and has an interesting grain.
Neck/head stock has a vintage tint to it. I really, really like it. Check out the pic below of the head stock side by side with my other Foundation. The color is much darker.
No fret wear. All the hardware and frets cleaned up nicely. No significant dents or dings, Barely a mark on it.
I love the feel of the nearly raw wood in my hands when I play it.
Sounds like a Foundation, but is more aggressive and gritty than my other Foundation. Its a good sound, but I actually prefer the sound of my other Foundation. Must be the mahogany and lack of poly coating that gives it that extra grit/growl/twang?
It was the dirtiest bass I've ever purchased. Not sweat, dead skin, smoke ... but actual dirt. It looked like it had been stored outside in the dust/sand here in Phoenix. Maybe all that dirt preserved it, because it cleaned up nice!
Defects or issues? Nothing of any significance. A crack in the corner of the control cover on back. Its epoxied and drying now. As you see in a lot of old Peaveys, someone had chiseled (or dremeled) around the access hole to the truss rod nut to make enough room for a wrench. It was nice and neat and didn't show with the truss rod cover on - all good. Except that they removed a little too much wood where the truss rod cover screw goes. Basically there was no hole for the screw to go into. I used epoxy and sawdust to build it up a little, drilled a small hole, then screwed in the cover. Worked fine.