• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Weirdest, most awesome bass ever?

Since we're talking weird, can't forget about Sling Blade:
103_1284-1.jpg


Built during a build off (again a couple of years back)... Here's the thread:
http://www.talkbass.com/forum/f57/moonshines-tb-bass-
build-entry-684492/


Moonshine :bassist:
 
It was a complement, don't worry. I think i need to have been playing for a bit more than 2 months to move to 7 string :P

I took it as one... the "I think" was about the mention of theft :p

I tune the 7 like a guitar with a low B added... but in the standard octave as basses. I don't think the number of strings should be limited by the amount of time logged in playing, so long as the time to learn the strings is taken.
 
I took it as one... the "I think" was about the mention of theft :p

I tune the 7 like a guitar with a low B added... but in the standard octave as basses. I don't think the number of strings should be limited by the amount of time logged in playing, so long as the time to learn the strings is taken.

Yeah, I just wanted to master, or at least get fairly adept, at four string before moving to 5 or above. Plus, money :P
 
I had high hopes for this one, but it failed as a bass. The body is one piece of solid oak burl. There is a reason why burl is used as a top only. The body flexed significantly. Tuning up the strings would raise the action about 1/4". After a few days at tuned tension, the action would creep up another 1/8" or so.

DSCF4942.jpg

DSCF4946.jpg


Someday I might try routing some 3/4" deep channels in the back of this thing, and glue some purpleheart in place to try and stabilize it. The original builder, (late 60's) installed some rods in the body, I'm guessing to stabilize it, and I don't know how far they extend or if they angle towards the front or the back. Anyone in L.A. have access to an x-ray machine?

JBY
 
I had high hopes for this one, but it failed as a bass. The body is one piece of solid oak burl. There is a reason why burl is used as a top only. The body flexed significantly. Tuning up the strings would raise the action about 1/4". After a few days at tuned tension, the action would creep up another 1/8" or so.

DSCF4942.jpg

DSCF4946.jpg


Someday I might try routing some 3/4" deep channels in the back of this thing, and glue some purpleheart in place to try and stabilize it. The original builder, (late 60's) installed some rods in the body, I'm guessing to stabilize it, and I don't know how far they extend or if they angle towards the front or the back. Anyone in L.A. have access to an x-ray machine?

JBY

Still looks cool :D