cap

  1. junglejimuk

    MIM Jazz pots into a P Bass

    Hi All, I'm modding a cheap Precision copy. I've put in Epic custom shop pickups (F1 for P Bass) which sound immense, but the input jack is crackling like hell. So... I have the pots and jack from a MIM Jazz which I've previously modded to a stacked knob setup. Someone must have done this before...
  2. JT Foster

    Ideas for a pickup/preamp upgrade for my SR300?

    So I have a perfectly good SR300 that I play all of the time. It’s a cheaper bass, but it was my first and it’s still a quality instrument. It’s more comfortable to play songs in standard since it’s a 4 string, but sounds like trash compared to my SR506. It’s just a very low output, and very...
  3. animus.terry005

    Bart preamp in Ibanez BTB with CAP Sonic Arch pups

    I have a 2014 BTB7 with CAP pickups.. long, skinny pickups with no viable replacement options without routing the pockets.. I'm ordering a Bartolini HR-5.4AP/918 preamp (5 knobs with push/pull and switchable mid) to install on this bass, hoping to really wake it up. Has anyone tried a Bart...
  4. casbonano

    Spend $ on new pups for SR250 or buy a Classic Vibe?

    Hello all. So I have a Ibanez SR250 that I got for a decent price new. I like the Bass itself but I don’t care for the sound. The pickups in it are CAP EXF-N2 pickups (that’s what I read here on TB). I really don’t dig them all that much, and really am a P Bass tone fan. I understand that...
  5. M

    Can i use any capacitor for my bass guitar?

    I saw this pack on ebay and it cost as much as one or two "bass capacitors". ive read that voltage doesnt matter and that material either. So my question is : Can i use any type of capacitor in a bass? Links to the capacitors im seeing 200pcs CBB Metallized Polypropylene Capacitors Kit 630V...
  6. T

    1960 Fender Precision: Original Pot/Cap Values

    Hey folks I recently acquired a 1960 Pre-CBS Fender Precision refin. It plays like a dream but I find it gets a bit honky when I dial the tone pot down. I don't think the pots are original: the volume is a 1966 250k audio pot whereas the tone is a 1960 1M audio pot. I don't know what the...
  7. 2

    Tone cap values for 51 reissue pbass

    Friends...... I am in the process of replacing the volume and tone pots in my new to me 51 reissue pbass. I will be using cts mini pots. AS my bass is a reissue, I am not sure of the value of the cap that is installed. I read somewhere on TB that the original 51 pbasses used caps with a...
  8. ObeyDaRiffness

    MM preamp resonant peak cap/res value for passive MM setup application?

    Hello. So, I'm planning to build a passive stingray, with a G&L style "OMG" mode switch and a Tonestyler, to get the clearest and liveliest tones out of it without active circuitry. I remember I've read that most of the signature "color" the preamp gives comes from a specific resistor Leo...
  9. F

    Help with this 2 capacitor tone pot

    So I opened my 2006 Hwy1 Jazz Bass and I found out that the 250k tone pot has two caps, one standard .02uF on the 3rd lug to ground and a second one between lugs 1 and 2 wich is 100nF. Has anyone know how this works or how's changing the tone? Thanks!!
  10. GerardoRicc

    Jazz Bass cap for true 1960 tone

    Hey everyone, as I already said in the title, I would like to ask what's the best capacitor value to get the closest tone to a 1960 Jazz Bass. I have a Squier Vintage Modified with Seymour Duncan SJB1 "vintage tone" pickups and I changed the cheap pots that Squier uses with genuine Fender (CTS)...
  11. Sparky Mark

    Amp experts: Is there a fault with this cap?

    Any ideas what could've caused the bulging on the top of this capacitor? Apparently the amp has been recently serviced and given clean bill of health.
  12. PBoogie

    P bass wiring and cap location

    Hello fellow bass players. Im building another p bass and trying out Bartolini 8S pick ups. The wiring diagram that came with them has the cap in a different location compared to others like Seymour Duncan. Is there an advantage? Any tips for cap location? Im will be installing flats and going...
  13. drewphishesp

    wiring diagram for push pull pot for 2 diff cap values P bass

    Anyone have a diagram for how to wire this, would like a .47 and a .33 cap to choose between
  14. R

    Mosrite 1965 Mark X Single Pickup Bass Cap Value

    I have a 1965 Mosrite Ventures Model Mark X Bass, single pickup. I have a problem with losing the volume as I increase the bass tone. I replaced the pots a few years ago because they would not clean up. I also replaced the cap on the tone pot. But I don't remember what value I used (I'd have...
  15. Sav'nBass

    Ariane Cap @ No Treble: New Year's Resolutions for Bass 5 ingredients to get results.

    This was a pretty good read. I really like her style of teaching. Ariane Cap @ No Treble: New Year's Resolutions for Bass 5 ingredients to get results.
  16. ihixulu

    Cap for GK 1001rb power button

    Does anyone know the Mouser or Digikey number of the cap for the power button (see pic)? It looks like it should be a generic component. Sort of hit a dead end with GK support. Appreciate any help.
  17. db22

    Correct pot & cap for humbucker?

    Earlier this year I acquired a low-end Ibanez bass, equipped with one humbucker. The tone pot didn't seem to work too well, so I replaced both pots with Bourns 500k pots, wiring them as the factory pots were and reinstalling the factory cap exactly as it was. Now the tone pot works, but all of...
  18. Fender F Cap Knobs 1980s Jazz Special
    Closed

    For sale Fender F Cap Knobs 1980s Jazz Special

    These are very rare fender f cap knobs they are around $60 a piece on another site we all are familiar with. Only one of these is complete. That 1 knob alone is worth about this lots price alone. These knobs are 3 pieces, the actual knob base, the rubber gripper and the F caps. All 4 have the...
    $59.00
  19. A-Step-Towards

    For Sale Fender F Cap Knobs 1980s Jazz Special

    These are very rare fender f cap knobs they are around $60 a piece on another site we all are familiar with. Only one of these is complete. That 1 knob alone is worth about this lots price alone. These knobs are 3 pieces, the actual knob base, the rubber gripper and the F caps. All 4 have the...
  20. bobbycas11

    Question about Dimarzio style Jazz humbuckers (model J) and tone caps/pots

    Hello everyone, I searched on here for answers about this and didn't find any, so I don't think this is a repeat post but if it is I apologize. I have a 2017 MIM Jazz bass that I love and I love upgrading it almost as much as playing it. So after doing the tuners/nut/bridge I tackled the...
  21. chinjazz

    Neck build: Nut Channel or not, Cap or not

    Hi TB Luthiers, It’s Friday and as I have in the recent past have a few noob questions that may have not been asked. I’m at the point with my current neck build which leaves me with options / questions some that may be in subjective territory. Given this placement pic, do you think I need to...
  22. A

    Original cap vs Paper in oil (headphone on please)

    Here's a quick demo of the difference between the 2 caps with my 51ri Precision MIJ:
  23. J Posega

    Where to Get 1 Pot, 1 Cap?

    I want to replace the tone control on my Dingwall SPJ5. I need to get 1 CTS or Bourns 500k Audio taper pot, and a .047 cap. Where does one go to get these two puny items for a reasonable item cost and shipping cost? Prices are too on Amazon, or they're selling in multiples and I have...
  24. Thebiggestjerk

    What's you favorite tone cap value?

    What's you favorite tone cap value?
  25. Thebiggestjerk

    Ibanez CAP EFX-N2 pickups.

    I have a 2012 Ibanez SR300 that has CAP EFX-N2 pickups. Does anyone know anything about this pups? I searched Ibanez website and catalogs and haven't found anything. What I really want to know is are the single coils or humbuckers?
  26. GeeBass
    Sold

    For sale Fodera embroidered baseball cap

    Fodera embroidered Baseball Cap Black, one-size-fits-all, with Velcro size adjustment strap. Brand new 'old stock' item – never used or worn. $20 shipped - to continental USA.
    Free
  27. GeeBass

    SOLD Fodera embroidered baseball cap

    Fodera embroidered Baseball Cap Black, one-size-fits-all, with Velcro size adjustment strap. Brand new 'old stock' item – never used or worn. $20 shipped - to continental USA.
  28. Gold Metal Dome Knobs with Mother of Pearl caps (Set of 4)
    Sold

    For sale Gold Metal Dome Knobs with Mother of Pearl caps (Set of 4)

    For sale is a lightly used set of 4 Gold Metal Dome Knobs with beautiful Mother of Pearl caps and set screws to secure them. These fit standard split shaft pots and solid shaft pots with a 6.4 mm diameter. I had these on a bass for only about a month before I removed them so they are in "like...
    $20.00
  29. bassbooty

    SOLD Gold Metal Dome Knobs with Mother of Pearl caps (Set of 4)

    For sale is a lightly used set of 4 Gold Metal Dome Knobs with beautiful Mother of Pearl caps and set screws to secure them. These fit standard split shaft pots and solid shaft pots with a 6.4 mm diameter. I had these on a bass for only about a month before I removed them so they are in "like...
  30. fingerguy

    Snapple Cap

    For those that drink Snapple, type/post what yours says on the bottom. 4/26/2017 9am EST Real Fact #1260 Mercury and Venus are the only planets in our solar system with no moon.
  31. swafran

    Flame maple tops & tone

    So I have a simple honest question, does a maple cap on a body change the tone? Is it just for looks, or does it help the sound in any way?
  32. Vomicamonster

    .047 1600V Capacitor

    Didn't read everything when I was ordering and got some 1600v caps instead of the 400-600 typically used in a bass. I know it's goot to have more volt power on a cap than what your system can make but can that large a difference be used in a passive bass setup? Juggling between trying it out and...