• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Dingwall Owners Club

So looks like i may have finalized my specs -

Afterburner ABZ 6 String
Trans White Finish
Maple Fretboard
FD3-3x
FD3 P-tone Neck
Glockenklang 3-band EQ


Question though, where are the position dots standard?

A couple of things of note. We don't offer a trans white finish on the ABZ. You can option up an ABI with swamp ash and get trans white on that. Also we don't have a P-tone available for a 6 string. However, on the 3x pickups we wire the neck pickup in series and that would get you reasonably close.
 
A couple of things of note. We don't offer a trans white finish on the ABZ. You can option up an ABI with swamp ash and get trans white on that. Also we don't have a P-tone available for a 6 string. However, on the 3x pickups we wire the neck pickup in series and that would get you reasonably close.

Ahh wish i was told about this sooner, will have to rethink everything now. So could you actually tell the different between the P tone and the neck wired in series? Also, what finished are available in the ABZ then, and why can't you offer trans white on the ABZ?
 
Ahh wish i was told about this sooner, will have to rethink everything now. So could you actually tell the different between the P tone and the neck wired in series? Also, what finished are available in the ABZ then, and why can't you offer trans white on the ABZ?


I 'run' my Dingwall V/Z with the pickups in series, and I agree with Sheldon, on it being very close to a Precision sound. I played an old Precision for nearly a decade before moving to Dingwalls, and the 'series' tone was pretty darned close to 'coming home' to that tone.
 
We had a lot of fun running through many excellent songs in preparation for tomorrow's 'praise-a-thon'. :hyper: My pastor captured these with his phone:

photo4_zpsc0b3baf9.jpg


photo2_zps694f68f9.jpg
Nice to see that Super P in action!!!
 
Ahh wish i was told about this sooner, will have to rethink everything now. So could you actually tell the different between the P tone and the neck wired in series? Also, what finished are available in the ABZ then, and why can't you offer trans white on the ABZ?

Series is not a P replication but it's in the ballpark.

Sorry for all the confusion. With 6 pages of models and options it's tough to spell out every variety in our price list. The ABZ gallery has pretty much all of the finish options I can think of.

The mention of trans white only on ash is referring to gloss finished instruments. We won't offer a trans white finish on open grain satin unless we can get it to look how we want. Trans white is a delicate finish to pull off. It turns slightly pink when sprayed over alder so we made it an ash only color.
 
I've changed a few of the Dingwall pickups to series to move towards the P tone sound. You take two of the four lead wires from the neck pup and solder them together, a bit of shrink wrap and you are done. Ten minutes tops. I don't recall exactly which colors at the moment, and that may have changed with pickups, but a quick line to Dingwall tech support will get you going.

It's a very simple and easily reversible mod. I did it on my Super J and on my AB-1 fiver. I might take a few minutes and do it on the sixer just to see if I like it. I'm very happy with the way the sixer is sounding now, so there isn't any rush. I think it would be better to add a switch, if that's possible, and have both options. I'm going to check into that.

The change to series moves you towards the P sound. You don't get all the way there, the upper mids and highs are not as pronounced, but the fatter, deeper part of the P sound is there. I liked the improvement on both basses, and based on that simple bit of experimenting, moved to P tone pickups when they became available.

The P tones have quite a bit more mid and upper range presence and are somewhat hotter pickups. I end up rolling the tone off, but really enjoy the solid punch. If a P tone was to become available for the six strings, I'd probably jump right on it. As it is, I'm content with the sixer's sound. Mine is an AB-1 and is passive, but has the blue Eqcube switch, so there is no lack of tonal variety available.

With a active bass there would be even more variety.
 
I've changed a few of the Dingwall pickups to series to move towards the P tone sound. You take two of the four lead wires from the neck pup and solder them together, a bit of shrink wrap and you are done. Ten minutes tops. I don't recall exactly which colors at the moment, and that may have changed with pickups, but a quick line to Dingwall tech support will get you going.

It's a very simple and easily reversible mod. I did it on my Super J and on my AB-1 fiver. I might take a few minutes and do it on the sixer just to see if I like it. I'm very happy with the way the sixer is sounding now, so there isn't any rush. I think it would be better to add a switch, if that's possible, and have both options. I'm going to check into that.

The change to series moves you towards the P sound. You don't get all the way there, the upper mids and highs are not as pronounced, but the fatter, deeper part of the P sound is there. I liked the improvement on both basses, and based on that simple bit of experimenting, moved to P tone pickups when they became available.

The P tones have quite a bit more mid and upper range presence and are somewhat hotter pickups. I end up rolling the tone off, but really enjoy the solid punch. If a P tone was to become available for the six strings, I'd probably jump right on it. As it is, I'm content with the sixer's sound. Mine is an AB-1 and is passive, but has the blue Eqcube switch, so there is no lack of tonal variety available.

With a active bass there would be even more variety.

Thanks for your reply. When searching for a new bass i was looking to go with something extremely versatile i cam across Dingwalls. The triple pickup config has so many tonal differences its amazing. Not making a p-tone for 6 stringer sucks so like i mentioned before i will maybe have to rethink my specs.
 
Can anyone comment on how Paysons compare to Circle K and Dingwall stock strings? I’m looking at getting a new set to replace my Circle K’s, and I’m torn between Payson’s and OEM strings. I’ve only used Circle K’s so far, so I really have no basis for comparison.
 
You sir, really are preaching to the choir. I am still on the Super P5. It's like a bad fungus. Just wont go away.

Once I get the the Super J converted to a Super JP, we'll see if they will take turns.

I spent some quality time this weekend with my 4 & 5 string SJ/P's adjusting the 'volume' (via height adjustment screws) of the bridge pickups when in series with the precision pickups. I adjusted both down a bit to dial back the piercing high end energy they can bring. The series settings now bring a slightly brighter, fuller tone than soloing the precision pickups without the potential for decapitation or piercing of ears. I like 'em even better now. :cool: