• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Dingwall Owners Club

One of the most common questions that we receive here is about the difficulty of adjusting to the Novak fret system.

Last weekend I went out of state to get together with guys from a band I played in 32 years ago. In addition, I was asked to play some original praise material in one of the guy's churches the following day.

I asked Dan Cavil if he had any interest in ripping on my Super J5 for his songs in service. He initially expressed concern as he has never been a 5 string guy, let alone a crooked fret guy. He asked to play it in a short rehearsal prior to service and loved it so much that he played it during service.

Frankly, he flat tore it up. And he was playing some arrangements that were so complex that they had me sweating sitting in the congregation. And as you can see, Dan wasn't shy about moving around on the neck. ( Is it so wrong that I push my Super J on every unsuspecting bassist I meet just so I can hear it through FoH? ;))

Proof that any competent bass player can pick up a Ding and tear it up with little to no adjustment period.

Important side note. The basses in this picture represent my bass journey in life thus far. When I was asked to move from guitar to bass back in 81, I agreed but I couldn't afford a bass at the time on Marine Corps pay. Dan lent me his spotless 79 Ric for two entire years. I fell in love with bass because of this man's generosity.

It's not often that we are afforded the opportunity to play the bass we started on. That Ric still sounds thunderous!

image.jpg
 
Last edited:
  • Like
Reactions: spiritbass
I was wondering how the Darkglass pre compares to the Darkglass pedals. For instance, I have a Darkglass B3K mirotubes box. Very cool pedal, with a wide range of useful sounds. No bottom loss. The B7K has all this plus the four band eq.

As it relates to Steve's question, is there a Darkglass pedal that approximates the on board pre featured in the NG-2's? Rather than a retro fit, what pedal would you buy?

The NG-2's look great, I love the colors.
 
I was wondering how the Darkglass pre compares to the Darkglass pedals. For instance, I have a Darkglass B3K mirotubes box. Very cool pedal, with a wide range of useful sounds. No bottom loss. The B7K has all this plus the four band eq.

As it relates to Steve's question, is there a Darkglass pedal that approximates the on board pre featured in the NG-2's? Rather than a retro fit, what pedal would you buy?

The NG-2's look great, I love the colors.

I'm guessing it might be similar yo the EQ section on the B7K without the distortion/gain up.
 
Anyone have any experience swapping a 2 band OBP-1 for a OBP-3 SK/PP in a AB1.5? Is there room for a push/pull pot and/or a stacked set of knobs? The knob for the mid shouldnt be a problem, but what stacked knobs have any of you used?

Thanks!
Stacked knobs work, but they generally have a (no giggles please) thicker shaft that may require the mounting hole to be enlarged slightly.

Aguilar has a lot of really good diagrams on their website showing different control configurations; I'm sure that you can make it work.

I installed a 3-band Bartolini NTMB in my first Afterburner (what's referred to now as an AB I).
That bass only had 3 pots, so how I did it was to omit the volume knob; I had pickup selector, mids, stacked bass/treble.

On an AB1.5, you would have 4 pots, so you could add back the volume pot, unstack the bass/treble, skip the bass EQ...
 
Stacked knobs work, but they generally have a (no giggles please) thicker shaft that may require the mounting hole to be enlarged slightly.

Aguilar has a lot of really good diagrams on their website showing different control configurations; I'm sure that you can make it work.

I installed a 3-band Bartolini NTMB in my first Afterburner (what's referred to now as an AB I).
That bass only had 3 pots, so how I did it was to omit the volume knob; I had pickup selector, mids, stacked bass/treble.

On an AB1.5, you would have 4 pots, so you could add back the volume pot, unstack the bass/treble, skip the bass EQ...

On the AB1.5 that I am hoping comes my way, I would just want to replace the 2 band Agi, with a three band one. My thoughs being that I can use the stacked bass/treble and push/pull mid in those two spots, and hopefully keep the BluEqube, and the active passive switch.
 
I can't see any reason why that wouldn't work.

I am just unsure on the room for it. The three knobs for the pick up selector, and tone knobs are close. Just wondering if there is room for a stacked set on the top, and the room for a push pull and stacked knob inside the body.

The 3 band push/pull mid, with the active passive, AND the BluEqube would be a monster.
 
On the AB1.5 that I am hoping comes my way, I would just want to replace the 2 band Agi, with a three band one. My thoughs being that I can use the stacked bass/treble and push/pull mid in those two spots, and hopefully keep the BluEqube, and the active passive switch.
Having retrofitted with a 3-band Aggy if I were to do it again I would change out the bluEQube for the mid control... the 18v 3 band is so powerful and versatile I can see why they chose to eliminate the bluEQube. Just my 2¢ anyway.
 
That blows.
On the bright side, there's no reason you couldn't add the OBP-3 to your AB1 and make it into an AB 1.5 -- plus your bass is a much cooler color than that other bass.

But I know you were ready to move that MusicMan onward and outward.
 
That blows.
On the bright side, there's no reason you couldn't add the OBP-3 to your AB1 and make it into an AB 1.5 -- plus your bass is a much cooler color than that other bass.

But I know you were ready to move that MusicMan onward and outward.

And I may keep that in mind. Would mean drilling the body, which gives me anxiety, but would be very worth it...

Which leads me back to my original question kind of.

What knobs have been used for stacked tone knobs?
 
Not wanting to drill an extra hole is why I left the volume control off my modded AB1 -- I was able to return it to stock/passive when I sold it.

It takes planning to find room for a battery in the control cavity, but it's possible.

And they sell the appropriate-sized stack knobs on Best Bass Gear.