• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Get off my LAWN! "Grumpy Old Farts"

Status
Not open for further replies.
They look like flying dinosaur era birds.
There's a semi-famous whooping crane rehab/nursery facility not far off that back road(I know how to get there but I won't). Occasionally a pair will fly off on their own. There's ranches along the back road(FL 523)that have grain feeding troughs that the birds will visit. Cattle don't seem to mind.
 
I've a set of Sennheiser HD 4.50BTNC cans that I want to connect by Bluetooth. I've a USB Bluetooth transmitter but haven't figured out how to get both the headset and transmitter working together.

With my bluetooth speakers, the speaker has a button to turn on BT pairing mode, on the computer the BT app looks for the speakers, you select the one that you want to connect to. Then in the sound app on the computer, you select BT instead of the internal speaker.
 
hey fellow grumpy people, I need a little cleaning advice for NBD. celebrate 7years clean/sober today so bought myself a little something last week hoping it would show up today, which it did 61 p bass, mostly original (pots and pups replaced which I will swap for period correct). has decades worth of patina aka.,grime. the body I'm just going to use wax/oil on, a little alcohol on the bridge. my question is the slab board. I could use a gallon of lemon oil, but is it.better to use a.light abrasive first to cut through the gunk? also, I found 61 pots, anyone know where to find 60/61 pups? thanks 20200318_130209.jpg 20200318_130209.jpg 20200318_130256.jpg
 
hey fellow grumpy people, I need a little cleaning advice for NBD. celebrate 7years clean/sober today so bought myself a little something last week hoping it would show up today, which it did 61 p bass, mostly original (pots and pups replaced which I will swap for period correct). has decades worth of patina aka.,grime. the body I'm just going to use wax/oil on, a little alcohol on the bridge. my question is the slab board. I could use a gallon of lemon oil, but is it.better to use a.light abrasive first to cut through the gunk? also, I found 61 pots, anyone know where to find 60/61 pups? thanksView attachment 3747978 View attachment 3747978 View attachment 3747980

Congratulations all around!

On rosewood, I would start with naphtha (lighter fluid), wear gloves, use it sparingly. You can use fine steel wool, grade #0000 (paint shop). Sometimes a little scraping against the frets with a razor blade is in order to get into the corners. Then finish with lemon oil. Do not use boiled linseed oil.

Finding vintage pickups can be a problem. Fender custom shop vintage pickups are not all that bad. I hate it when sellers part out pickups and electronics before a sale.
 
Last edited:
Woo. Computer has sound. Kind of expecting the mic on the headset won't work but there's a mic on the monitor.

Oh there are totally people who wind perfect vintage pickups and I'm exactly the one not to know beans from butter about that. Sweet NBD!
 
hey fellow grumpy people, I need a little cleaning advice for NBD. celebrate 7years clean/sober today so bought myself a little something last week hoping it would show up today, which it did 61 p bass, mostly original (pots and pups replaced which I will swap for period correct). has decades worth of patina aka.,grime. the body I'm just going to use wax/oil on, a little alcohol on the bridge. my question is the slab board. I could use a gallon of lemon oil, but is it.better to use a.light abrasive first to cut through the gunk? also, I found 61 pots, anyone know where to find 60/61 pups? thanksView attachment 3747978 View attachment 3747978 View attachment 3747980
Mr. @the slug congratulations on your milestone! It's good once in a while to reward ourselves for a job well done. I don't have any insight on your rehabilitation but I'll bet @Passinwind or Mr. @beans-on-toast will. Once again, congratulations! :thumbsup:
 
Woo. Computer has sound. Kind of expecting the mic on the headset won't work but there's a mic on the monitor.

Oh there are totally people who wind perfect vintage pickups and I'm exactly the one not to know beans from butter about that. Sweet NBD!
Not to state the obvious but did you go into the audio panel and select the headset microphone? Windows doesn't always correctly select the right mic automatically, although it should have. If you are using USB should be no-brainer. If you are using 1/8" plugs there are two-one for headphones and one for your headset mic. Good luck!

EDIT: Sometimes a headset has a dual plug, whereas one plug will go into a headset/mic input on the computer. It will have two black lines on the silver tube of the plug.
 
Mr. @the slug congratulations on your milestone! It's good once in a while to reward ourselves for a job well done. I don't have any insight on your rehabilitation but I'll bet @Passinwind or Mr. @beans-on-toast will. Once again, congratulations! :thumbsup:

Nah, David's the man for vintage stuff. But be sure to use adequate ventilation when using any solvents. I'll only use naptha outdoors and generally prefer pure food grade orange oil for cleaning stuff up, assuming that doesn't involve plastic bits, which it could stain. Still need proper ventilation with that as well.


As far as new-old pickups, this guy used to live around here and reputedly does a fab job: Invalid Link Removed
 
Last edited:
What I have here is a Bluetooth transmitter that runs on a line out. But forgot about the mic. A dedicated Bluetooth USB is what's in order for the mic.

What a pain this has been to set up but the view is pretty good. Lot of trees down. Always woodland creatures to be sighted. About three deer just went by. :yawn: The ones I don't often see are more interesting when I do. You know, always appreciate there are no snakes in Ireland. Heck, even the Romans took a look and said, "too cold and wet".
 
Status
Not open for further replies.