• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Lakland Owners Group #63

Status
Not open for further replies.
Nothing you guys haven't seen before but, I just bought a new Skyline DJ5. Only been a few days but I'm really liking this bass. I've had a 55-02D before that I liked but we ended up parting ways to finance another bass.

This would ruffle some feathers elsewhere in the forum, but I've had 3 Sadowsky basses - 2 Metros and an NYC - and I'm liking this Indonesian built Skyline better. Neck is a better fit for me, love the DJ body and the passive sound through the Lakland singles is great! The setup out of the box was spot on. Also, from what I've read about fluctuating weights on the Skylines, I lucked out and got a light one. Haven't had a chance to weigh it for the official, but it feels sub 9 pounds - it's noticeably lighter than my 9.5 pound Roscoe.

Have an Audere DJ 4-band on the way which should make this bass unstoppable - though it really is great passive.

null_zps4cc75fb5.jpg
 
null_zps4cc75fb5.jpg
[/QUOTE]


Very nice. Some of these Skylines are truly fantastic. I have had several, and right now my plain 5502 is better playing than about anything I have had in my hands. Though, I will admit I have not played a US lakkie. Is this the Princess Leia to your Avatar? :p I not sure this fits with the Dark Side, so you should likely send it to me :D
 
This is the best I can do right now. I have had limited time at night and have spent those free moments playing this guy and not photographing it. Stunning bass all around and the neopunch is not as aggressive as I remember. It might stay in there.

null_zpsa739c8c3.gif

very nice Johnny!

OH NO!

So, I got my refins back today, which were great. Short review...Wilkins does a more pro job, but I like Marty better and would pay less and wait less again over going with Pat. Even though there were some minor details of flaw here and there...

but on to the OH NO!

My darkstar hollowbody had apparently the loosest solder connections ever, one by one they keep breaking. I can't exactly figure out what went to where...can anyone send me a photo of the guts of theirs? Or maybe link me to a schematic that would work?

It has a three way selector, the two pups and a small switch that's not meant to do anything...there are a lot of wires that lead to nowhere too. How confusing!

hmmm..interested to hear more about the differences between the two...I have always used Pat but others are "Marty Fans" (why do I think of Back to the Future as I type that?)

hope you can get the wiring figured out on the HB!

So what's the story on the upcoming Dan Lakin Basses? Does anyone know?

not much yet...just "they are coming"....I have been meaning to call him but have been slammed.....

Quick, dumb question: For the LH-3 preamp, is that attached to a circuit board? Or is it more free-form?

The reason I ask is, were I to get a 4-94 or 44-02, I might like to re-order / change the knob layout / location...but I imagine that might not be possible if it's on a circuit board...or at least a huge hassle.

the pre-amp itself is on a board but the knobs are wired with some leeway....

why do the knobs differently?

View attachment 339358
View attachment 339359

In other news, the glaub is KILLER. lollipop tuners vs clover. I'll do a headstock shot later.

The HB doesn't actually have the bridge or knobs attached yet but I set em on for the shot :)

I'll go into the details of why I felt that Marty's job wasn't up to Pat's par later but I wanna say that I fully endorse Marty and I will do business with him again. The details aren't huge but I'll let you guys know.

OH man...love them both!!!!
 
Oh... I found this while searching the inventory of one of my "more local" Lakland Dealers... Hmmm

Lakland44-64-offwhite-body_02.jpg

OH my!!!!

I need to get to the shop more...I am missing previews of all kinds of cool things!

I believe it is single coil....unless it is the new vintage CHIs....

love the look and color.....glad it is missing a string...

BTW - you are getting closer and closer to your nickname becoming real....

I need a playbook to keep up!

Man, that is yummy. I'm only a few $k away from buying that then swapping pickups with my DPLEII... It almost sounds like a reasonable idea.

...well...ALMOST!
 
This one's in a shop local to me.
US 44-60 w/ abalone block inlays:
Link Removed

Nice Dano.....are you "thinking"?

Give me a SC Chi any day over a bucker... in a P anyways.

ahh...why???

after playing Tom P's HB with the new vintage doubles last week, I think they would sound GREAT in a single P body config...or maybe even a double P config.....hmmm....ideas ideas...

I didn't realize they made single coils in the big covers.
The more you know....:bassist:

...the more you love lakies? I know....it sucks...at least for the pocket book.

I know, a lotta love went into this one, so yes I must be a little nuts.

I KNOW you are a bit nuts....but that is what makes us us...we all are a little nuts....or we would not be bassists... :hyper::bassist:

got this baby restrung with Dunlop nickels and set up today. Playing and sounding like the beast she is.

lak1ashx_zps145fa279.jpg

with Streamliner 900 and Bag End stack of 15s -

bagendsashx_zps8a7b11fe.jpg

love the GLAMOR shots!!!! and didn't you "almost" sell it soon after you got it??? :atoz: tsk tsk.... :)

I'm doing everything I can to resist this! I would have to sell both of my basses and my practice amp to maintain marital bliss....

Good luck with the sale

she will get over it....they all do....trust me...my wife is a champ at "getting over" the Lakie infusion.....I was supposed to have 3......"THAT IS ALL...no more basses in this house".... :smug: :D
 
Well, junk. My soldering experiment didn't exactly work.

Here's what I'm noticing. The bridge volume is wack. It makes no sound at 100% on, but turn it down some and it works.

Did I burn it out? Or maybe it's a wiring / ground issue? I should probably head over to the proper forum, but I like you guys better ;)

darn it...sounds like you need a trip to a professional....

+1

A wiring ground issue is more like it works or doesn't.

Just a quick mention, make sure your soldering iron is good and hot when soldering grounds to the case of the pot, you want to get in make a good solid connection and get out. I've ruined a few with extended heating and reheating because the iron wasn't hot enough.

I use a Weller WLC100 40-Watt that lets me control the temp and set it at 4 which works great.

I always turn mine to "11"....:) (sorry - could not resist)

In other news, I performed the Lakland recommended neck treatment with orange oil and scotch brite pad on the Ice Blue JO. It really makes a difference, the neck feels even better than it did before. I would definitely recommend doing it if you have had your bass a while.

NICE! I will have to try it...

anyone know what the standard strings, brand and size, come on the lakland Skyline hollowbody bass. and what flat strings are on the sound bites on the websight, which i can't seem to open lately.

I think they are Lakland standard stainless strings...they are on most other Lakland Basses.....I would bet the flats are Lakland JO Flats...kind of tough to come by....Lakland always seems to be out of stock on them...they DO get them in but the incoming always seem to fill back orders!
 
Feels rewarding to put a bass back together huh? Closest thing most of us will come to being a luthier like Master Pedigo :-).

I told Carl once that if I win the lottery, I'll come study under him... be his apprentice. Other than performing live, building basses is a real passion I'd like to explore.

that would be cool! I do not think I am "particular enough" to do that....

if I became independently wealthy I would convince every bass player I admire (or band I want to learn) to teach me some of my favorite songs "just the way" they play them....(that is if they are still alive and they are willing to take some "reasonable payment" for a day or two of "lessons").
 
It's been a long time, but my baby got some action in the studio this weekend! Granted, it was my photo studio, but thought that you guys would appreciate this rough version of something that I'm working on.

And just so you know, the juices are flowing and I'm actually putting a little something together to start playing again. It's been WAY too long!

p1776988668-5.jpg

nice and VERY NICE Randy!!!!

glad to see you will be playing again.....I was very sad when you said that part of your life was over.....

Only one "suggestion"...the bass playa' needs a wide white belt...
 
Hello Markus.

Do you still make mockups?

I'd like to have an idea of what my ideal Lakie would be like.

If possible (:-)) :

44-94 body,

Shoreline gold with matching or black headstock,with long shaft tuners

Single coil Chi sonics (like in the 44 60) in the standard jazz bass position( like ben kenney's bass)+ 44-94 classic pickguard in white (again like ben kenney's bass)

images?q=tbn:ANd9GcTJNqOHE-Ca0kAa_TS6oHopjIFkZX2rXocuh8Yh0U8r14b3udmU.jpg




Passive--> 3 knobs, black fluted like the skyline decade.

I think it would look rad!

what do you have THERE??? a dual J? I think I want a MUCH bigger pic!
 
Status
Not open for further replies.