• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Double Bass New EA VL208?

Ric, if you haven't heard the EA Wizzy cabinets yet, you oughta if you can.

I know Tom Bowlus (and many others) have posted lots of info on the Wizzy. And I believe Tom may have actually stated at one point that he slightly preferred the Wizzy to the VL 208 as a stand-alone cab. But please correct me if I'm wrong Tom! And I'm not exactly sure if this was based on trials w/ slab or DB or both.

I think Tom describes these two EA cabs as "different but similar," although he does it much more eloquently than that and in much more detail.

By the way, I am not trying to talk anyone out of the proposed NL 208. Just sharing my enthusiasm for the Wizzer.

I am anxious to try pairing a WZ-112P powered Wizzy with my iAMP-200 C Wizzy combo. (Although if I ever have to play that loud, it would probably tick me off ... hm).

"I love my Wizzy!"

And I just love saying that. Goofy, I know. A bumper sticker to that effect would raise some eyebrows I reckon.

But it is a great cabinet for both double bass and slab, "in my opinion" of course.
 
bolo said:
Ric, if you haven't heard the EA Wizzy cabinets yet, you oughta if you can.

I know Tom Bowlus (and many others) have posted lots of info on the Wizzy. And I believe Tom may have actually stated at one point that he slightly preferred the Wizzy to the VL 208 as a stand-alone cab. But please correct me if I'm wrong Tom! And I'm not exactly sure if this was based on trials w/ slab or DB or both.

I think Tom describes these two EA cabs as "different but similar," although he does it much more eloquently than that and in much more detail.

By the way, I am not trying to talk anyone out of the proposed NL 208. Just sharing my enthusiasm for the Wizzer.

I am anxious to try pairing a WZ-112P powered Wizzy with my iAMP-200 C Wizzy combo. (Although if I ever have to play that loud, it would probably tick me off ... hm).

"I love my Wizzy!"

And I just love saying that. Goofy, I know. A bumper sticker to that effect would raise some eyebrows I reckon.

But it is a great cabinet for both double bass and slab, "in my opinion" of course.


JazzTimes Magazine just wrote a stellar review of the iamp 200 and 500 Combo for jazz GUITAR! - not even bass - they're finally starting to come around :D

Mike
 
bolo said:
Ric, if you haven't heard the EA Wizzy cabinets yet, you oughta if you can.

I will take your recommendation and (Toms) and see if I can find one
somewhere. St. Louis is not exactly EA land. I have both the VL 108 and
the 110 and I love them. What I really need is a little larger cab. I passed
on the VL 208's because I was looking for something lighter. Wished I hadn't.



bolo said:
I think Tom describes these two EA cabs as "different but similar," although he does it much more eloquently than that and in much more detail.

By the way, I am not trying to talk anyone out of the proposed NL 208. Just sharing my enthusiasm for the Wizzer.

Believe me, no one could talk me out of a NL 208 if they ever put them into production!

bolo said:
I am anxious to try pairing a WZ-112P powered Wizzy with my iAMP-200 C Wizzy combo. (Although if I ever have to play that loud, it would probably tick me off ... hm).

I have never had much luck with powered extension cabinets. Had
one of the the early GK MB series with the powered cabinet, never cared for it, but then it wasn't a Euphonic Audio product.

bolo said:
"I love my Wizzy!"

bolo said:
And I just love saying that. Goofy, I know. A bumper sticker to that effect would raise some eyebrows I reckon.

Yeah, that could be a problem. There was a guy who wanted to
call my Clevenger Bass, "Clevey". I used to give him a wide birth.

bolo said:
But it is a great cabinet for both double bass and slab, "in my opinion" of course.

I actually prefer "word of mouth" to reviews
 
bolo said:
And I believe Tom may have actually stated at one point that he slightly preferred the Wizzy to the VL 208 as a stand-alone cab. But please correct me if I'm wrong Tom!

No, that is correct! I almost didn't want to believe it, but that was what my ears were telling me. Of course, it could have been a 4 ohm versus 8 ohm thing (though I tried to equalize volume levels). That particular experiment was with electric. I spent some time comparing two NL-210's and one CxL-112 to one and two Wizzy's with upright, though, and again, I slightly preferred the Wizzy's (though they each had some very strong points and all sounded great).

Tom.
 
tombowlus said:
No, that is correct! I almost didn't want to believe it, but that was what my ears were telling me. Of course, it could have been a 4 ohm versus 8 ohm thing (though I tried to equalize volume levels). That particular experiment was with electric. I spent some time comparing two NL-210's and one CxL-112 to one and two Wizzy's with upright, though, and again, I slightly preferred the Wizzy's (though they each had some very strong points and all sounded great).

Tom.

Tom,
How you digging your newest piece of EA gear?

Mike
 
Mike Dimin said:
Tom,
How you digging your newest piece of EA gear?

Mike

Well, the first thing that happened when I got it home is my son put it on his head, so there must be something inherently compelling to kids about those EA hats! ;)

Seriously, though, that is a very high quality hat, and I like it a lot! And of course, the red on black is the "classic" way to go! :p

Tom.
 
tombowlus said:
Well, the first thing that happened when I got it home is my son put it on his head, so there must be something inherently compelling to kids about those EA hats! ;)

Seriously, though, that is a very high quality hat, and I like it a lot! And of course, the red on black is the "classic" way to go! :p

Tom.

I am sure you already noticed what happened to mine :D
 
Checked in with John yesterday, he says the cab is finalized but he's still working with the driver design, waiting for the second cut of drivers. He's exploring cone materials and surrounds.

It won't come out of the oven 'til it's done, guess we'll have to wear bibs to catch the drool in the meantime.
 
Ric Vice said:
Thanks for the update Bob. Personally, I'd rather John was really
finicky and got as close to a NM version of the VL 208 as possible. After all, ultimately it's the sound of that cabinet that I think we are all looking for.

Ric :)

John is very particular and is working diligently to come up with the right sound and the right cabinet.

Mike
 
I want to be the first to call dibs on any of those heavy, inefficient VL208s that will be for sale once the new NM208 comes out. :D Growing up the youngest of five, I'm perfectly content with hand-me-downs. ;) (Especially if is has an "EA" on it!)

If not, den go'head 'n' putt me down fer onna dem der NMs.