deepestend
Commercial User
- Feb 21, 2003
- 6,249
- 8,168
- Disclosures
- Website and Social Media at Sadowsky
Latest one for me... includes a TFR from the mystery box deal... it glows in the dark!
Enjoy the benefits of a premium membership!
Upgrade Account
-
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
Show me your compact pedalboard setup
- Thread starter garmenteros
- Start date
deepestend
Commercial User
- Feb 21, 2003
- 6,249
- 8,168
- Disclosures
- Website and Social Media at Sadowsky
No, a Lehle Line Driver. The 1176 requires a line signal. The SVT 2 Pro effects loop produces more of an instrument signal.
2 Pro. Yes, with a Line driver to boost the effects loop signal .
Cheers...this will be the final compact pedalboard that I will be using from here on out...no reason to change.
DXCBass-Love Squeeze(JohnK)-ParaEQ-ReVolt-Opus
Loop: Moore e-Lady Flanger + UA Orian Tape Echo
The Orian runs with the preamp on all the time and the footswitch activates the delay. The e-Lady operates only on #3 Channel drive signal in the wet/dry mix.
DXCBass-Love Squeeze(JohnK)-ParaEQ-ReVolt-Opus
Loop: Moore e-Lady Flanger + UA Orian Tape Echo
The Orian runs with the preamp on all the time and the footswitch activates the delay. The e-Lady operates only on #3 Channel drive signal in the wet/dry mix.
Last edited:
The Xpand boards are awfully nice, and versatile. Cases are great! Mines in my last post.^^^Cheers...this will be the final compact pedalboard that I will be using from here on out...no reason to change.
View attachment 5284746
DXCBass-Love Squeeze(JohnK)-ParaEQ-ReVolt-Opus
Loop: Moore e-Lady Flanger + UA Orian Tape Echo
The Orian runs with the preamp on all the time and the footswitch activates the delay. The e-Lady operates only on #3 Channel drive signal in the wet/dry mix.
I also have the Cioks SOL under the D'Addario expandable board. Mine is maxed out but could remove the ReVolt and effects, and move the OPUS down on to the smaller section, and be operational.
I have used the 3M snap-lock for so long the regular Velcro on this board seems stronger than I expected.
So far, so good...
I realize you may not be able to accurately answer this but do you think a Cioks DC7 would fit under the one-row Xpand?
Great, thank you! I actually have some feet like that laying around from building my studio rack.
In addition; I think it will also fit just fine without modification if you raise the front feet a bit and mount the CIOKS 7, Eventide PowerMax or CIOKS SOL a bit forward and not centered. This is what I did.
I also mounted the power selector switches facing the Velcro side, not the exposed side for two reasons (a) the power supply will not be changing function (b) I positioned it where the lower section rubber feet just touch the floor as the boards feet do as well. It just felt more solid with it not hanging with the Velcro to me.
Last edited:
toppers on or off? cali76 and cogs on a nano powered by cioks
Here’s my compact board I made out of a piece of aluminum plate I had laying around.
I put taller feet on, to more easily fit the Cioks Sol under mine.
