Enjoy the benefits of a premium membership!
Upgrade Account
-
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
Show your amps!
- Thread starter Osama_Spears
- Start date
- Status
Here's my amp.... SWR LA15. Just got it for 125 on ebay! damn good deal, imo... 100W, 15" driver... she's good to me...
I really should have gotten around to posting this earlier.
It's a bit tricky getting the mix right, between clean and dirty, but it's hella fun, and sounds like the devil coming home. That Stingray with this rig is a beast. (And will be more beastly if I could get that damn SVP-Pro moved).
It's a bit tricky getting the mix right, between clean and dirty, but it's hella fun, and sounds like the devil coming home. That Stingray with this rig is a beast. (And will be more beastly if I could get that damn SVP-Pro moved).
Is that an Ampeg guitar cab? What is the thing running between the SVP-pro and the Peavey head?
jja412 said:Big Rig: Ampeg SVT into Eden 410-XLT.
Small rig: Mesa Walkabout into Aguilar GS-210.
Biggest rig : Ampeg into both cabs.
Looking to get a Thunderfunk and a Schroeder 1210 and 1212 someday...
But my basses are more than covered for now.
Ohhh, i like the look of the sansamp programable bddi
I wish i was better at taking pictures, but anyways, heres my setup
And here's the rest of the family
The 6 strings runts are just there for writting (and soon to be self recording)
And here's the rest of the family
The 6 strings runts are just there for writting (and soon to be self recording)
S. Byrnes said:
Indeed it is. Ampeg V412.
The thing running between them is a Morley ABY pedal. It splits the signal two ways. I plug my instrument cable into, and it splits the signal, so I don't have to have a stereo bass or anything. I could just run the preamp out from the the SVP-Pro, but I don't like having the Ampeg's signal in before the Peavey, it doesn't sound nearly as good as just plugging into the Peavey. Why put a preamp before a preamp, you know?
Not too many pictures or users of these on the boards.
Yep - I use the Bose PAS with two subwoofers. The whole band uses them.
Yep - I use the Bose PAS with two subwoofers. The whole band uses them.
Eggman said:
Damn.... mad nice... I tried one of those pups out once... it was bliss, i tell you, bliss!
Brendan,
If you can, try to locate a Randall 4x12 Jaguar loaded cab. They're discontinued but heavy as all hell. They KILL the Ampeg cabs, I've had both...
~S~
If you can, try to locate a Randall 4x12 Jaguar loaded cab. They're discontinued but heavy as all hell. They KILL the Ampeg cabs, I've had both...
~S~
DEVILMAN said:
No doubt. The Ampeg was merely in my meager budget, and came up at the right time. I have no illusions that it's a great cab or anything.
I'll keep an eye out for a Jaguar.
I've got a gig tonight so I had to bring them into work,..... might as well clean them up and take a photo.
SWR 350x - in the process of being replaced
Ampeg SVT 410CA4 - 600W, 4 ohm
JMC Single Fifteen - As seen in the 'DIY cabinets' thread, 1250W, 8 ohm
Ampeg SVT 410CA4 - 600W, 4 ohm
JMC Single Fifteen - As seen in the 'DIY cabinets' thread, 1250W, 8 ohm
Sounds more like it has proved you right.Cúl-Báire said:Hehehe Here is my current setup.
Amp: Gallien Krueger RB400 III
Cabinet: Hartke 210XL
Basses: Fender American Jazz Bass (2005)
Spector NS2004 (Just sold)
Link Removed
It does the job quiet well, I quiet like the GK head- At first I was concerned it didn't have enough power for bigger "situations", but it has prooved me wrong. The Hartke cabinet has caused some problems with one of the speakers crapping out after 3 months use
On the list of things to do- I will be replacing the Hartke speakers with Eminence Delta 10's, porting the cab, and change the rear plate also so it has Speakon & 1/4 jack input/ext- Bassicly I am using only the chassis. I will also be building a 1x12" cab to fit under it to offer some more lowend.
Ashdown RPM1 Preamp & a Crown Power Amp are to follow but thats a long way off yet
Hehehhe Well yes and no! The new gear is simply for a change of tone- I find the sound of the GK, way too clean! Even when cranked to dirty oblivion it's clean 
I'm after something more tubey, and something to be able to push abit more power through the new cabs.
I'm after something more tubey, and something to be able to push abit more power through the new cabs.This thread should be stickied like the show us your bass thread.
http://img.photobucket.com/albums/v472/SirPoonga/bass/hartke2000.jpg
http://img.photobucket.com/albums/v472/SirPoonga/bass/hartke2000.jpg
sorry guys my cab is is MIA for now since its in storage at my church this week, but here's a shot of my rack, both old and new:
old:
[Invalid or Expired Link Removed]
new:
[Invalid or Expired Link Removed]
2nd one is a little blurry.....oops
old:
[Invalid or Expired Link Removed]
new:
[Invalid or Expired Link Removed]
2nd one is a little blurry.....oops
heh....probably the lightbulb thats one the wall behind me when i was taking the picture..the tuner is pretty glossy...
- Status
