• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Stoner/Doom Bassists Thread, Part 90: Maxed Out

losing it, must buy a g&l p bass in the next three days to deal with stress, got one waiting for me in the midwest and one in the southwest, ugh, why am i going all ocd like a depressed fat girl, that's not very doomy at all, gonna listen to the hand of doom radio and try to avoid working on my free form jazz opus today, might do some photo work today to refocus
 
  • Like
Reactions: Muddslide
losing it, must buy a g&l p bass in the next three days to deal with stress, got one waiting for me in the midwest and one in the southwest, ugh, why am i going all ocd like a depressed fat girl, that's not very doomy at all, gonna listen to the hand of doom radio and try to avoid working on my free form jazz opus today, might do some photo work today to refocus

Have some cake... Eat your feelings.
 
heres some pics of the new set up at the space...the fungshui is fung-great!
20150514_203745.jpg

Looking into the room from the door...sitting area with couch and mini fridge and unfinished vega mural are off the right out of picture.

Finally painted that bare drywall wall, purple was the obvious choice.
20150514_203121.jpg


The new soundproofed ceiling makes GH sound so much better, for VEGA its a bit wierd yet. But theres no question its a major improvement soundwise...I even had to dial PVYHenge back a bit.

Finally tried out Pelham Bleu's Megalith I have on loan, HOLY FVCK!!! Eyeball rattling low end, ridickadankulous amount of output...but its almost too much. It was causing like a latency or phase issue that made it sound like I had a delay on when going full bore, replaced it with my black muff and the issue was gone. Spent a good amount of time knob diddling and on my rig it all kinda sounds the same, the tone changes are very sudtle. BUT that lowend is city leveling. Cool pedal but a one MASSIVE elephant sized trick pony.
 
Last edited:
heres some pics of the new set up at the space...the fungshui is fung-great!
View attachment 616463
Looking into the room from the door...sitting area with couch and mini fridge and unfinished vega mural are off the right out of picture.

Finally painted that bare drywall wall, purple was the obvious choice.
View attachment 616461

The new soundproofed ceiling makes GH sound so much better, for VEGA its a bit wierd yet. But theres no question its a major improvement soundwise...I even had to dial PVYHenge back a bit.

Finally tried out Pelham Bleu's Megalith I have on loan, HOLY FVCK!!! Eyeball rattling low end, ridickadankulous amount of output...but its almost too much. It was causing like a latency or phase issue that made it sound like I had a delay on when going full bore, replaced it with my bkack muff and the issue was gone. Spent a good amount of time knob diddling and on my rig it all kinda sounds the same, the tone changes are very sudtle. BUT that lowend is city leveling. Cool pedal but a one MASSIVE elephant sized trick pony.

More Heavy ain't a fugging lie.
 
  • Like
Reactions: JoeVictim
More Heavy ain't a fugging lie.

No it aint.

Im sure some big ol bass tube amp like a SVT would gobble up the lowend it puts out with ease but my old SS cant take that much I guess...

Speaking of tube amps, my mace sounds fugging baller while using my phase wizard as a boost pedal, a little bit of clean grit for normal then slam it with 20+dbs of boost makes it scream.
 
Last edited:
  • Like
Reactions: Pelham Bleu
One of the first songs I learned on electric bass. Glad to have seen him once in my life.


RIP
My first time on stage at an actual rock club, the band I was in covered "The Thrill is Gone".
I was fortunate enough to see him on a tour with Taj Mahal, Indigenous, and Kenny Wayne Shepherd at the Santa Barbara Bowl when I lived in CA back in 1999.
Only other concert I saw at the Santa Barbara Bowl while I lived there.... Tool w/ Melvins :) Nice place for a show.
 
Dammit Corey!
Fill me in on the deets on the dually!

****... beaten. Thats what I get for being to busy to chat with you dudes.

I'm seeing some good cab deals on gc used. Peavey 8x10 for $200. I've had them ship pedals to my local store for free, i wonder if they'd ship a cab.

****... I could get that shipped to my local GC and get a fat discount on it, but I really don't need more non 215 cabs.

losing it, must buy a g&l p bass in the next three days to deal with stress, got one waiting for me in the midwest and one in the southwest, ugh, why am i going all ocd like a depressed fat girl, that's not very doomy at all, gonna listen to the hand of doom radio and try to avoid working on my free form jazz opus today, might do some photo work today to refocus

You have another SB-2 tucked under my bed as well, haha.
 
  • Like
Reactions: mpdd
So I bought and received two JBL K140s. Both were listed as being in good working condition with no rips tears or dents.
20150508_102957.jpg


Speaker one arrived with a small tear in the outer ring(foam?) of the cone. I decided to keep it and accept the sellers offer of a partial refund. I asked for just shipping, he gave me 50%. I am happy with that deal because other than that tiny hole, the speaker is in fantastic condition. I am hoping that it will not require a full recone, but I really do not know a damn thing about speaker repair. Either way I will be good with it as I paid (after refund) $40 for the speaker.




And then speaker two arrived yesterday.


IMG_0004.JPG


This was also pictured in excellent condition, despite having been reconed and voided of aluminum. This is what showed up. Seller insisted it was well packed and that fault lies with the post office.

IMG_0005.jpg


Yeah... that definitely looks like a USPS error... No support at all. Just a broken down box and a minimal amount of bubble wrap. Contacted the seller and they have sent me a return label and will issue a full refund. Kind of a bummer, but at least its a clear cut deal breaker. Still gotta find one more intact K140 before @D.M.N. clears out the global supply.
 
Trying to determine if there's doom band practice tonight. I would like to be loud for a few hours, but if it doesn't happen I'd be content to sit on the porch and drink beer.
I don't even load gear these days until I know what room were playing in. Lately just using practice amps in an over loaded one car garage. Drummer using a roland E kit through another practice amp. Low volume practice has helped get some of the songs tight. But it's so much fun being loud.
 
I don't even load gear these days until I know what room were playing in. Lately just using practice amps in an over loaded one car garage. Drummer using a roland E kit through another practice amp. Low volume practice has helped get some of the songs tight. But it's so much fun being loud.

Yeah, with the practice spot being 40 miles away I really want to be sure that everyone is going to show up before I load up the car and drive down there. Still haven't heard from anyone. I'm wondering if this band is going to make it.

I have high hopes for band #2 on Sunday - I like that there's 13 songs all ready to go.
 
  • Like
Reactions: kzr750r1
The Behringer clones sound pretty decent, maybe get one of those to use while you look for a deal on the real thing.

Remember the official Entombed/Dismember setting for the HM2 - all knobs on ten.

I believe you mean all knobs on "eleven".

One more HM-2 thought: Abominable makes a killer clone that has add'l mids control and a second FS that boosts the gnarliness. It was called YM-2 Yeti Metal but then rebranded to Throne Torcher.

I remember seeing that before. Trying not to spend that much, but we'll see. It's always an option.

Another option if you're handy with a soldering iron
The Swede – Build Your Own Clone

Yeah, soldering is going to be a summer project of mine. Definitely on my short list of pedals to build, along with a Grey spec DOD 250.