• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Stoner/Doom Bassists Thread, Part 90: Maxed Out

Stupid question: is there some sort of effects switching box? I just want a pedal that switches between two different pedals, maybe with a master bypass, and preferably passive (using no power). I'm sure it's out there, I just have no idea what to call it, and the Loop Master website terminology (I'm sure it's all standard, I'm just terrible at it) confuses me.
 
Stupid question: is there some sort of effects switching box? I just want a pedal that switches between two different pedals, maybe with a master bypass, and preferably passive (using no power). I'm sure it's out there, I just have no idea what to call it, and the Loop Master website terminology (I'm sure it's all standard, I'm just terrible at it) confuses me.

I dont know the name off the top of my head, but most famous people with hit songs do it. Look up black keys rig run down he explains what you're talking about.

I say famous because it's kinda expensive and generally it's used to recreate exact sounds. And as dan says in the vid, some guy behind stage runs half of it. Though if you were less demanding than him it probably wouldn't come to that haha.

To go even further, Neil Young has his "Whizzer" and it is a loop system that lets him switch settings on his amp on the fly. It rotates the knobs for him.
 
That's the reason I got Mr. Grumpy with a Slave In jack. Any smaller amp I like the sound of at home with a fx loop or preamp out, I can just plug in and make insanely loud.



It seems that way on paper, but the Traynor isn't really low wattage or clean. It's maybe just a hair quieter than a 100/120W head and not too much headroom at all really. I posted a head to head shootout with it against the clean channel on my Carvin recently and you can really get a sense of how different it takes pedals. It's awesome if you want a really thick, slightly scooped and really pushed sounding tone, but at this point I really like sparkly clean and relatively mid forward or just flat for my clean tone, to run pedals into. If I was playing guitar in a gigging band and was building my tone around that amp, it would be pretty killer, but it's not great for me as a kind of all purpose pedal platform at home, for recording demos and such. I really notice I've just moved to preferring that kind of 6L6 tube based Fender/Mesa kind of cleans for building up pedal dirt.


Here's the clip in question. Joyo UD into each amp. In a perfect world, stereo rig with one of each would be killer. Nice contrast against each other.

[Invalid or Expired Link Removed]

Amps like the Traynor bassmaster can be tricky to use for guitar at truly low volumes because neither channel is really ideal. There's the bright channel, which has a bright cap across the volume pot- if you set it really low, the sound is tremendously brittle. Set it at about 6 or 7 there's a nice tonal balance with some edge but you're at full volume with thick overdrive and the neighbors calling the cops. The "normal" channel doesn't vary much in EQ through the sweep, but it's positively dull for guitar especially at the lowest volumes. 10 minutes of modding will get you to fendery land though...
 
Sorry about the bloated link, but does anyone know if these work with like Donner/Mooer/Eno/Malekko whatever pedals? Any better offers that $4.30 for one, or is there something else?


Amazon.com: Hosa GPP-146 Guitar Pedal Crank, 1/4 in TS to Same: Musical Instruments

I have a bunch of those, they work on most pedals with side jacks, provided the jacks are at similar heights off the ground. What sucks about them is that they force you to stagger the pedals up and down by over an inch, which eats up a lot of space on a pedal board. Also, QC is poor, I've had a couple snap way too easily and two that were just too crooked to use.

Switched my whole board over to EBS flat patch, much cheaper than the hosa couplers and very well built. They also allow you to take up less space on a pedal board.
 
As an Amazon Associate, TalkBass may receive commissions from qualifying purchases made via links on this site.
I have a bunch of those, they work on most pedals with side jacks, provided the jacks are at similar heights off the ground. What sucks about them is that they force you to stagger the pedals up and down by over an inch, which eats up a lot of space on a pedal board. Also, QC is poor, I've had a couple snap way too easily and two that were just too crooked to use.

Switched my whole board over to EBS flat patch, much cheaper than the hosa couplers and very well built. They also allow you to take up less space on a pedal board.
image.jpeg

These guys are level and staggered by design. I'm not planning on keeping them probably, but they serve a stand in examples until I get my mooer pedals if I do.
 
Stupid question: is there some sort of effects switching box? I just want a pedal that switches between two different pedals, maybe with a master bypass, and preferably passive (using no power). I'm sure it's out there, I just have no idea what to call it, and the Loop Master website terminology (I'm sure it's all standard, I'm just terrible at it) confuses me.

How many channels do you want? Did you want a buffer or boost? I know you said passive, and that's cool but with multiple channels I'd suggest a buffer or boost. That's the big issue with mine. But I'd build you whatever you'd want/need.
 

Attachments

  • image.jpg
    image.jpg
    635.4 KB · Views: 43
  • Like
Reactions: Squanch72
Also if you order loop master, they make an excellent product but be prepared for a wait so long you'll probably not need or want it by the time you get it. Like 4-5 months for a loop pedal.

Not trying to knock loop master, they do make awesome stuff. Just making light the reality of their turn around.





My night tonight: two grown men, name calling, denying their own participation in the name calling and general *****ing. I'm fairly immature for being 27. But **** some of these guys hurt my head with how childish they are. All I'm thinking is, "just make the ****ing bread and mind your own business". You'd think that was asking for the wheel reinvented.
 
Last edited:
How many channels do you want? Did you want a buffer or boost? I know you said passive, and that's cool but with multiple channels I'd suggest a buffer or boost. That's the big issue with mine. But I'd build you whatever you'd want/need.
Thanks, I'll keep that in mind. I'm trying different board configurations to maximize space, and once I figure it out, I'll let you know if I need something.
 
  • Like
Reactions: Turkeypills
So I know the bass micro synth is like several pedals in one, but is there an actual list of circuits used? I like the idea of the pedal but no presets seems kinda lame.

I was thinking like you could get a mooer micro chain that replicates the BMS but let's you turn on and control each section a semi preset alternative. Octave - slow gear - fuzz - filter?