• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

U.S. Peavey Club

Speaking of stealth Peavey basses...

$(KGrHqV,!mEE+7-4IbRQBQLDgOSBmw~~60_12.jpg
 
Look what the UPS man brought today! This thing looks to be NOS. Everything is cherry, and the back covers still have the protective film on them! There was a clear decal of some kind around the controls, looked stock, but not great, so it came off. A little bummed because it has one of the necks that are painted or whatever... the graphite weave is only visible on the headstock. Still has the serial number sticker. Starts with a '10', so I'm guessing it's a 2000. Played it for a few with the roundwounds it came with, but will give it a longer go once I slap on some flats. Only came with a gig bag and not the case I thought it was coming with, but other than that, I dig this thing so far. I'll likely give it a try on a couple gigs this weekend!

7797754918_1e0f6376a0_z.png

Invalid Link Removed by nicjimbass, on Flickr

7797755290_4b7689602e_z.jpg

Invalid Link Removed by nicjimbass, on Flickr

7797755758_0f7ce9a35a_z.png

Invalid Link Removed by nicjimbass, on Flickr

7797756406_0a76347664_z.jpg

Invalid Link Removed by nicjimbass, on Flickr

7797756068_eec641305c_z.png

Invalid Link Removed by nicjimbass, on Flickr
 
I have a 89 Foundation & the strings are in the bottom four holes in the bridge & the saddle screws are in the top four holes. The saddles are flat against the bridge & slant at a downward angle. Is this correct? I don't have any problems with the string height on the fretboard but, was wondering if there is any undue stress on the saddle screws being slanted

Thanks
 
I have a 89 Foundation & the strings are in the bottom four holes in the bridge & the saddle screws are in the top four holes. The saddles are flat against the bridge & slant at a downward angle. Is this correct? I don't have any problems with the string height on the fretboard but, was wondering if there is any undue stress on the saddle screws being slanted

Thanks

If it has the bridge I think it has, this sounds right...intonation screws - top holes, strings - bottom holes.
Can you post a pic? I'd like to see the angle thing.

mech
 
If the action is good (all up and down the neck), then don't you think it would be better to shim the neck and raise the saddles? It seems like using the neck tilt to allow you to raise the saddles would change the action. Make it too high on the higher frets.
 
If the action is good (all up and down the neck), then don't you think it would be better to shim the neck and raise the saddles? It seems like using the neck tilt to allow you to raise the saddles would change the action. Make it too high on the higher frets.

Six of one and half a dozen of the other except for having to remove the neck and make and fit the shim.

mech