• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Worship Bass Pedalboards

Is there a thread or a place for worship bassists to share and discuss HX Stomp patches, best practices, etc?

I'm using my stomp for the first time on Sunday and I'm looking for resources.
I've gotten some great patches from Shae Wooten of Elevation Worship and Adam Kiser of Bethel Music. Shae's is super clear with a punchy attack and Adam's is super dirty, emulating his settings on the Tone Hammer and bass microsynth.
 
I bet that sounds amazing. I've been really wanting a Noble. How do you think the Khan compares?
I had the Noble with my main setup also and compared the Khan against it. To me I liked the khan best as I felt the preamp of the Noble clashed with the preamp of the Messenger. The clarity and precise adjustments of the Broughton Messenger paired with the Khan Tube Goodness was a match made in heaven. My bandmates begged me to never get rid of the Khan lol.
p1.jpg
 
I've gotten some great patches from Shae Wooten of Elevation Worship and Adam Kiser of Bethel Music. Shae's is super clear with a punchy attack and Adam's is super dirty, emulating his settings on the Tone Hammer and bass microsynth.
I can second those two choices. Both are phenomenal. I am a big fan of the Bethel tone so the Kiser one was always a go-to. I use an actual Tone Hammer and MicroSynth now so no need for that preset, but it was pretty darn close. Also, the HX MicroSynth emulation tracks a lot better than the actual pedal.
 
  • Like
Reactions: gzarruk
I can second those two choices. Both are phenomenal. I am a big fan of the Bethel tone so the Kiser one was always a go-to. I use an actual Tone Hammer and MicroSynth now so no need for that preset, but it was pretty darn close. Also, the HX MicroSynth emulation tracks a lot better than the actual pedal.
Haha same. I'm basically running Shae Wooten's patch now with the microsynth and tone hammer in an effects loop that replaced his amp block. I like his settings for compression and boost at the beginning as well as his IRS
 
I had the Noble with my main setup also and compared the Khan against it. To me I liked the khan best as I felt the preamp of the Noble clashed with the preamp of the Messenger. The clarity and precise adjustments of the Broughton Messenger paired with the Khan Tube Goodness was a match made in heaven. My bandmates begged me to never get rid of the Khan lol. View attachment 4191592
That's great to hear considering how much less expensive the Khan is. Thanks!
 
My go to for massive these days is the Sonic Farm 2DI4. Pentode mode is the definition of massive. :D

It does look interesting.

Once again...no dimensions:

TECHNICAL SPECIFICATIONS:
1 channel
Design concept: (tube) pentode hybrid preamp
2 tube modes: triode and pentode
Frequency response: 10Hz-50kHz +/-3dB
Maximum gain: 54dB at the line output, 32dB at the DI (mic level) output
Harmonic distortion: <2% before clipping level, quickly decreases if driven less.
Maximum line output level: 30dBu
Minimum output load: 600Ohms
Connectors: XLR DI and line output, balanced only
Instrument input: 1/4" unbalanced, mono
Input impedance: 2.2MOhm
Amp: 1/4" unbalanced, mono, buffered
Power consumption: 15W
Operating voltage: 110-120VAC or 220-240VAC, switchable
All supply voltages regulated.
285V Plate voltage for huge headroom
Gold plated printed circuit boards with a double copper layer.
Gold plated tube socket
We give a one year warranty on parts and labor.
 
It does look interesting.

Once again...no dimensions:

TECHNICAL SPECIFICATIONS:
1 channel
Design concept: (tube) pentode hybrid preamp
2 tube modes: triode and pentode
Frequency response: 10Hz-50kHz +/-3dB
Maximum gain: 54dB at the line output, 32dB at the DI (mic level) output
Harmonic distortion: <2% before clipping level, quickly decreases if driven less.
Maximum line output level: 30dBu
Minimum output load: 600Ohms
Connectors: XLR DI and line output, balanced only
Instrument input: 1/4" unbalanced, mono
Input impedance: 2.2MOhm
Amp: 1/4" unbalanced, mono, buffered
Power consumption: 15W
Operating voltage: 110-120VAC or 220-240VAC, switchable
All supply voltages regulated.
285V Plate voltage for huge headroom
Gold plated printed circuit boards with a double copper layer.
Gold plated tube socket
We give a one year warranty on parts and labor.

From the Sonic Farm site: Sonic Farm Pro Audio | Creamer Pentode Preamp | 2di4 Pentode Direct Box | 2DI4 Pentode Direct Box

Of the lunchbox style boxes the 2DI4 is easily my favorite.

Xnip2021-03-05_12-23-00.jpg
 
It or to be massive as it is massive itself lol.

Hmm. Well it is shorter than the REDDI, not as long wide or high as the Zod and very similar to the Broughton SSDI/P-15 so I guess all of these must be "massive". It's only 1" wider and taller and 4 inches longer than the Noble. I carry the 2DI4 in a Pedaltran Nano carrying case.

2DI4 11 3/8" x 6" x 4" (no tall handle anymore) bu
Zod 12.75″ x 6.125″ x 4.25″
REDDI 14.5" X 3.5" x 3.5"
Broughton SSDI 10.5" x 6" x 4.25"
Noble 7 1/2" x 5" x 3"
 
  • Like
Reactions: kevk and MascisMan
Hmm. Well it is shorter than the REDDI, not as long wide or high as the Zod and very similar to the Broughton SSDI/P-15 so I guess all of these must be "massive". It's only 1" wider and taller and 4 inches longer than the Noble. I carry the 2DI4 in a Pedaltran Nano carrying case.

2DI4 11 3/8" x 6" x 4" (no tall handle anymore) bu
Zod 12.75″ x 6.125″ x 4.25″
REDDI 14.5" X 3.5" x 3.5"
Broughton SSDI 10.5" x 6" x 4.25"
Noble 7 1/2" x 5" x 3"

It was a joke that didn't land lol. The picture showed a close up and made it look huge. I've heard great things about this device.