Latest Posts

You are a boatload better than me.

You are indeed living the dream!

Sorry, guys, this is bound to start a fight.

Just dug out an ancient RS77M set, and man it may be the strings of answer for this bass! No wonder why Gibson bass flats used to be monel wound. I bought before COVID for the Gibson SG Bass I used to have, but I didn't remember it sounding particularly good on that one. On this bass it twangs and growls 100% like a long-scale RS77LD set but feels much better, it's neither taut like its long-scale brethren nor floppy as its gauge number may (mis)indicate.

Aric Bjorn said:

It reminds me of Binky, which is kinda like social media without the social media part, if that makes any sense:

Binky: Your New Favorite App

Binky

www.binky.rocks

Click to expand...

Really making me miss my "Pet Rock."

Update: The harness arrived, and well...it didn't fit. Holes were a couple of millimeters too small for the new pots, which required 10mm holes, and the old knobs were made for split-shaft pots, not for the solid 1/4 knobs of the Obsidianwire harness.

Luckily, I had a good round filer, and after 1 hour (and the hardest forearm workout I ever did), I managed to enlarge the holes on the control plate enough for the new pots to fit. Ordered some Allparts 1/4 knobs (they were on discount for only 8 euros). I assembled everything, and voila', it works, and it sounds great. A picture of the result (with the new finish, the original one was sunburst):

Lots of great GENERAL info in the thread that can be cherry-picked and used together to make the tone you require.
Can't say any individual pedals mentioned are a one-stop solution.

You might luck out and get a 1-pedal solution, but more than likely it'll take that ensemble of the ripest cherries.

My suggestion, get the following:

HIGH-PASS FILTER to get rid of the crud and mud that tires ears and messes up your overall sound
CROSSOVER CLEAN-BLEND, one able to add an OD to your lows, and distort/fuzz mids & highs; don't add full-freq clean-blend, just lows.
POWERFUL EQUALISATION, something that can target specific resonances would be good
OVERDRIVE of CHOICE
DIST/FUZZ of CHOICE

That crossover with overdriven lows and a full-range fuzz should integrate well — avoid the oil-on-water so many seem to hate.
Who knows, you may get away with running just an OD > FUZZ.
You may find that the last pedal in the combo defines the character of your tone, for example it may be better to shape the FUZZ's tone with an OD after it, an OD with some good EQ to retain "sparkle" while rejecting "fizz". For ex: a distortion or OD after a Muff can "unscoop" the mids needed to cut and have clarity in the mix — which OD, and which Muff? Well ...

There are so many options out there the combinations are unlimited, so many different tastes/requirements, and of course so many individual playing styles unique to each player... What works for one person may not work for another, even if the two people are playing through the same rig (like going up and guest-spot on a tune using someone else's entire gear-chain).

Hopefully you've got enough information from the thread to guide you on the correct path for you.
If you DO find a 1-pedal solution for yourself, well... BRAVO!

Good luck, & happy tone-hunting!

sprag said:

Malekko sneak attack?

View attachment 7518732

I have a zvex loop gate which works well and takes up little room.
Only problem is the sideways orientation.

Click to expand...

Ah I thought they had an FX-Looped option like that, but that might indeed be what I was thinking of

Bob_Ross said:

...or vocals: I had a Kustom tuck'n'roll column speaker with (2) 12" drivers and (3) 8" drivers that was already ancient by the time I inherited it in 1981.

At some point in the mid-/late-80s I parted it out and built a Bandmaster-style 2x12 guitar cabinet using those (2) 12" drivers from the Kustom column.
It sucked.

Click to expand...

Group I was with back then had the tuck 'n' roll Kustom P.A. cabinets that had 2x15" JBL's and a big round silver horn in the top of each cabinet.
(I think they were advertised for use for P.A., guitar and keys.)
The Kustom P.A. heads were maybe 4' long, way under powered with few controls for each channel, and was a true PIA to carry!

But, they sure were LOUD!

Good sounding?????.....well.....they sure were LOUD!

kbs21 said:

and black and maple is always cool.

Click to expand...

Indeed!
Drop by and post a pic or two

We have a similar thread on a local German board. Which reminds me on something…

According to the oldest pics from 2003, where I used it already, somewhere in 2002 a fellow Pitter had bulk cable in different colours and straight/angled jacks and offered to build instrument cables.

Now, I learned that the biggest risk for cables are guitards, so I ordered some in red, 6 m, straight/angled and straight/straight. These are still in use w/o any problems, aside from one where I ruined a plug when closing the Bass case while the plug was inside the metal frame.

Excellent! Whoever has build them, thanks!

I know where it is……..

Metal Sombreros said:

Jason is a shrewd businessman worth many millions, not as much as Lars and Het but he is doing just fine.

Click to expand...

Plus he still earns plenty of royalties from all the albums he played on

Late tot he party but I just got one of these USED and it faired very well on a session with the New Mexico Avant Jazz Workshop Band was big - Electric Piano Rhodes, Drums, Electric Violin, 4 saxophones, bass clarinet and he also sometimes played his electric bass. Music was dynamic but it was not a cocktail jazz moor like the volume of a horn driven band.

It was my clean bass sound as my STAT-B drove a Merix EnxoX, Source Audio Artifakt and an Eventide H90 Amplification was provided by my AI Coda combo

I fot this used gtom a TB member as my Audio Technica is shot. I would have to back off the level or not use it at all.

Clean sound was good. I did boost the highs some but overall I think it It captured the bass well and had good sound bleed rejection. Mount was good even though I was playing a bit physical

DonaldR said:

Bunch of guitar players swapping pickups on their $10K Gibson Les Paul.

Click to expand...

True, but for most Sadowsky fans, the electronics are the heart of the bass. All sorts bodies can used for a Delano/Audere loaded bass. That said, it is his bass, and he knows what he likes. More to the point, he does mods for a living and the bass sounded great in the videos he recorded at church. I think it would have sounded great stock, but it was not my call.

kevinpmajka said:

Clear would work too.

Not sure. I skipped that color I would have wanted rosewood fretboard with that color.

I have a clear on my black sparkle.

Click to expand...

I opted to cover up the black dots with these:

Peavey 1991 second gen Dyna Bass still in action all these years later...the bass has aged better than I have loll

pfschim said:

agreed. Foster was a slick LA producer type and the music biz of that time was generally pretty (and unfortunately) slick too.

Click to expand...

.........on the other hand, Foster made them fortunes.

Lvtdiego said:

Good evening at all!
Sorry my english written.
I am a Diego and I write from Italy; It has been bass for about 20 years.
I have in my hands a 5-string bass Godin SD5 and I need some help:
I know the godin group bass is produced in Canada (Richmond) and assembled in USA .... does anyone know where the USA is?
Still: The serial number is 00493241; I have a lot of difficulty knowing the year of production.
Can someone help me?

Thank you and Good music at all! (In Italy it is said so)
Diego

Click to expand...

2000 model

Bonkersville said:

Nice. Too bad you had to cover most of that old interior. But I appreciate the choice of green foam over the common dark grey.

Click to expand...

That foam was given to me so it wasn't really a conscious choice. Also if I could found a way to use the interior, I would probably have done it. This was a pretty quick assembly, though.

FishDub said:

Thanks!

Click to expand...

Just wanna give you a heads up on this, because i was in the same boat as you years ago. If you don't go with the direct replacement be very mindful of the dimensions. I ordered a stacked knobs combo off amazon thinking they would be pretty universal but the hole in the bottom was too big which resulted in the set screw putting it off center.

JohnEdward said:

Didn’t Jamerson try fixing a broken flat?

Click to expand...

It was actually La Bella. He used the set running from .052-.110

Leisure Weaver said:

I would have but I thought that would have violated the rules of this particular sub-forum. Thanks for the backup!

Click to expand...

Rules? Hold up...