frequencies

Hi everyone! I'm wondering what would be the best way to avoid the loose of low ends while switching on the distortions. My board has one Boss Ds1 and a proco Rat and since they're guitar pedals, they cut a lot of low frequencies and there is a big difference between the clean sound freqs and...

Hi, I own a TRBX 504, which I love. I'm curious what the EQ frequencies are, when dealing with the on-board electronics. I can't seem to find that info anywhere. I know that I can boost or cut...but which frequency (in hertz) are the EQ knobs centered around? Does anyone know? Cheers,

Are there music styles or classic bass tones set by a 4 band EQ setting; (Bass, Lo-Mid, Hi-Mid, Treble) and Compression as an extra tool for creating those, If so what sounds and tones you are getting from different EQs?

Standard is to tune to A = 440hz, but there are several voices saying that we should be tuning to 432hz as was done in the past, to sync all harmonics to the base earth frequency of 8hz. If anyone is doing it, have you felt any difference? Do you know availabe tuners in the market to tune at...

Part of my zanny experiments, looking to make this circuit part of my onboard preamp. Not looking for a 3 band para-eq (which I already have) and not just a simple bass boost. I need to be able to select frequencies from the sub-bass to at least the low mids. Getting higher frequencies would be...

I just recently made two purchases that have me a little perplexed... I bought: A used Fender Rumble 75, and A used Squier Affinity Jazz bass The Rumble is the most powerful amp I have ever owned. My gigs are all in churches that have professional audio systems and monitoring. I honestly have...

I am not sure if this is a bass amp question or an electric bass question. So I will ask it hear as people are likely more knowledgeable in the amp area than in the bass area -- the issue seems to be electronic. I have a Cort Curbow -- one of the classic ones from the 90's -- and when I played...

Frequencies of notes up to the 15th fret of a 5-String bass in standard tuning (BEADG)

hi all, I am searching (like everybody) for a decent lightweight and inexpensive amp solution of at least 150W. ideally i really need something that i can carry on public transport with my DB. i play swing style on gut strings and with no drums (for the moment). I am using a david gage lifeline...

Hello all. A couple of months ago I picked up one of those DIY 2 Band Stingray style preamps from a fellow TB'er. I believe it was made using one of those Uncle Fluffy boards. Anyway, I finally got around to installing it. I put it in one of my Stingray's using the stock pickup. I'm not too...

Making this more specific to the B7K Ultra because I am not quite sure the true proper forum to put this in, but I would also like to know if the answer generally applies anything with an equalizer. I am playing around with the B7K to get some certain tones and need some help. The frequencies...

Of the dozens of bass amps out there, very few have the same frequency centers for their tone controls. Many of them are obviously designed for bass guitar. I would like to see a discussion on this subject, particularly from people who are very pleased with the eq section of their amps as...

Hello talkbass! I have the opportunity to get hold of a fish'n chips eq pedal for cheap; I need an eq pedal to cut out the low mids and low frequencies for biamping with a guitar amp and not make the speakers blow. I realized that turning the bass knob down doesn't operate the low frequencies...

Hi guys! First, I want to clarify that I am not a bassist, but an audio engineer in a jazz club, so double bass is a hugely important part of my work! I have a distortion problem that seems to be following me, and I'm having a hard time troubleshooting it. I'm hoping you can help me. In my...

So I've heard multiple times that low frequencies tend to travel along the wall and are most present in corners (and therefore sound isolation for low frequencies are put in the corner, if I am not mistaken.) However, I have never gotten any explanation why. Can someone help me out?

So open bass strings go from roughly 40hz to 100hz. Crossovers are typically set at 100hz. Doesn't this mean that almost all of the bass sound is going through the subwoofer? Isn't this NOT what you want? Wouldn't you prefer your mids and highs to go through the typical dual 15 PA speakers...

I have noticed in certain situations that when I play a note like C# we get I get a boomy sound or even feed back in the PA system. I have experienced this in other venues when playing different notes. It happened today in church, causing the sub woofers to feed back. Is this caused by room gain...

When setting up the EQ on your amp, how do you go about deciding which knobs to boost vs. cut? My first inclination when setting EQ is to use boost to correct tone and even out deficiencies (e.g., boost bass to add bottom, boost mids or treble to cut through) - but are there circumstances...

Color-coded frequency mapping for semi-parametric EQ section of TC Electronic RH heads to make it easier to identify where certain tonal frequency ranges appear on each adjuster. Added a legend to identify certain frequency ranges and the tonal impact of adjusting levels within those frequency...

I played through a rig this past weekend where my open A String through fret 5 (D) had a lot of nice bass. It typically does not have that. My guild starfire is pretty boomy once you get further up the neck. It was through a MarkBass LittleMark 210. I don't recall how the EQ was set...

Created a handy table utilizing data from TC Electronic's website to quickly identify default and frequency settings within the semi-parametric EQ.

I've been fascinated by the perception of very low frequencies for many years now and thought I'd share some thoughts and questions. I honestly don't know if anyone gives a poopie. FWIW, I enjoy a lot of old music, primarily because all of the parts need to be played by humans on instruments that...

I like my Walkabout. It's a great amp with a classic Mesa style Eq set that gives me what I want. But the speaker has given me more trouble than I've wanted. I got a used silver faced model that originally hade a problem with a speaker. Even though it was used, mesa boggie still fixed up the cab...

Not sure of the wording to search for my question so I apologize if it's been answered. I basically want to know how to determine which frequencies to boost with a 10 band EQ after an overdrive sucks some of the tone out. I know usually it's the lower range, but how would I figure out how much...

Does anyone have any info on what the Bass/Mid/Treble centres are on these basses? Thanks in advance if anyone does.

Other than Mike Pope Flexcore, does anyone know of an onboard preamp that does 80hz, sweepable mid, and 6k-10k treble? Bartolini does 30hz Bass (really???), nice mid selectors, and a 10K Treble. Nordstrand is close except for a 4K Treble, too low for my liking. Noll is similar, but they DO...

What programs do folks use to pump white noise into an amp or pedal, then read a RTA readout to check the EQ points? Bass Gear Mag does this with all their tests, but I can't figure out what they use, and I've seen someone else do this to figure out what the Enhance knob on SWR amps does. I'd...