neutrik

  1. S

    Markbass customer service seems to have lied to me as a customer

    I'll start off by saying this: I'm probably over thinking this. So I recently purchased a Markbass Little Mark 58R head. It's a good sounding head, but I had some questions so I emailed Markbass customer support. One of the things I inquired about was Markbass using generic Speakon jacks on...
  2. Bass Danger

    Neutrik Speakon to 1/4" for Mesa D800+

    Hello all! I just picked up a Mesa D800+ & a Mesa Subway 410. I understand and respect that these components are quite picky about using Neutrik specific Speakon cables. My question is, if I want to plug the head into a cab that will only take a 1/4" connector is there a cable for that? For...
  3. Mogami Gold, Phil Jones Bass, Planet Waves, Rode ***Prices Further Reduced***
    Closed

    For sale Mogami Gold, Phil Jones Bass, Planet Waves, Rode ***Prices Further Reduced***

    Hey TB'ers! Family is growing and my music space is slowly shrinking. Here's a great opportunity to pick up some high quality items at a discounted price. Instrument: -Planet Waves 1/4" (now D'Addario PW-AMSK-15) instrument cable - 15ft $35 -Unknown manufacturer 1/4" instrument cable (very...
    $30.00
  4. Federighi

    For Sale Mogami Gold, Phil Jones Bass, Planet Waves, Rode ***Prices Further Reduced***

    Hey TB'ers! Family is growing and my music space is slowly shrinking. Here's a great opportunity to pick up some high quality items at a discounted price. Instrument: -Planet Waves 1/4" (now D'Addario PW-AMSK-15) instrument cable - 15ft $35 -Unknown manufacturer 1/4" instrument cable (very...
  5. Old Ozzie Guy

    Speakon cables , Neutrik vs nonbranded

    Hi all, IV recently bought a AG700 and have just started "hearing" weird distortion tones. IV ordered 2 Neutrik cables, , but I had an unbranded speakon to jack which IV been using. I keep noticing "weird" top end fiz , that comes and goes.and gain seems to vary ??. IV swapped instrument leads...
  6. Smallmouth_Bass

    Output Jacks - Different for Active Basses? Patch Cord issues?

    So, I recently had some issues with a new bass that I thought was the onboard preamp. It was intermittently not working in active mode. After some troubleshooting and support with the Company’s technical support, it was discovered that output jack was not making the correct contact depending on...
  7. NL4MP_speakON_2

    NL4MP_speakON_2

    • Riddlin
    • Media item
    • neutrik nl4mp
    • Comments: 0
    • Media category: Misc
  8. NL4MP_speakON_1

    NL4MP_speakON_1

    • Riddlin
    • Media item
    • neutrik nl4mp
    • Comments: 0
    • Media category: Misc
  9. (3) NEUTRIK XLR NSB modular panels

    For sale (3) NEUTRIK XLR NSB modular panels

    Three NEUTRIK XLR plates - $25 for the set (1) NSB-MQP Spare 4 male Plate (2) NSB-FQP Spare 4 female Plates These plates are NEW unused, for the Neutrik Modular Snake System or built into a custom desk panel or drop snake. Can be wired by either IDC connector system or soldered directly...
    $25.00
  10. K

    For Sale (3) NEUTRIK XLR NSB modular panels

    Three NEUTRIK XLR plates - $30 for the set (1) NSB-MQP Spare 4 male Plate (2) NSB-FQP Spare 4 female Plates These plates are NEW unused, for the Neutrik Modular Snake System or built into a custom desk panel or drop snake. Can be wired by either IDC connector system or soldered directly...
  11. jschulman

    Phil Jones speaker cables - worth it?

    I guess this is more of a general question about speaker cables. I just ordered a Phil Jones BP800, and I'm going to run it through a couple of Bag End S15X-D 115 cabs. Right now I've got a couple of generic Speakon to 1/4" speaker cables to wire them in parallel. The BP800 manual says: "We...
  12. Jefenator

    Certain Jacks Not Working With Certain Plugs

    I've had some issues lately that seemed to be a bad cable or jack, but turns out it might be a bit more complicated than that. The other day I was rehearsing with an old Yamaha and an old Spectraflex cable with Switchcraft plugs and it was cutting out like crazy - so bad we couldn't continue. I...
  13. C

    Dingwall ng2 jack replacement

    Hi to all My dingwall ng2 has a false on the jack and I believe that is about to pass away. I've searched for a replacement part on the Dingwall site but the only available is the NEUTRIK jack: Invalid Link Removed But I believe that this will not fit since its different of the one my bass...
  14. DuckSoup

    Anyone else have issues with Neutrik Locking Output Jacks?

    So my Ibanez BTB came with one of those locking Neutrik Output jacks. About 6 months after buying my bass, I started getting a lot of static and buzzing after plugging in. The more time passed, the problem started to happen while I was playing, and it eventually led to loss of signal. So I...
  15. MrMarino

    Making Bass Cables

    I am making some custom cables and have come to the Website Redco.com they have a ton of cable tips for sale at various prices. I am just wondering if anyone can give me a heads up on a certain type that would be best. I have used Neutrik and Amphenol in the past. Obviously those are the main...
  16. Quinn Roberts

    Neutrik Locking Output (Ibanez BTB)

    After a years of ignorant use and abuse, my trusty ol' BTB's output is starting to go. I know they're easily purchased online, and replacements are simple. For a number of reasons, however, I'm not sure if I really want to stick with the locking output going forward. The idea is great, but what...
  17. NMTB

    Neutrik Timbre Jacks, anyone?

    Has anyone had personal experience with the Invalid Link Removed or Invalid Link Removed jacks? Stumbled across them and was curious what (if any) positives/negatives their "timbre-changing abilities" hold.
    • NMTB
    • Thread
    • 1/4 cables connections connectors input jack leads neutrik plug timbre
    • Replies: 8
    • Forum: Accessories [BG]
  18. TrevorOfDoom
    Sold

    For sale Shure SLX14 Wireless w/Rack!

    It's a Shure wireless that never fails! Works a treat. Been rackmounted since the day I got it from Sweetwater. Includes original box with all accessories included! Includes upgraded cable (Mogami & Neutrik ends). The rack case is a OSP 3space, 10" deep. Has pouches inside the lids(?) for...
    $550.00
  19. TrevorOfDoom

    SOLD Shure SLX14 Wireless w/Rack!

    It's a Shure wireless that never fails! Works a treat. Been rackmounted since the day I got it from Sweetwater. Includes original box with all accessories included! Includes upgraded cable (Mogami & Neutrik ends). The rack case is a OSP 3space, 10" deep. Has pouches inside the lids(?) for...
  20. A set of two Neutrik NL4FRX Speakon SPX Right Angle Connectors
    Sold

    For sale A set of two Neutrik NL4FRX Speakon SPX Right Angle Connectors

    Brand new, sealed a set of two Neutrik NL4FRX speakon SPX Series Right Angle connectors. No soldering needed. All you need is a small Phillips screwdriver! $11 for a set of two. (the picture shows 4 but 2 are sold) Overview Speakon® SPX Series Professional Loudspeaker and Amplifier Connectors...
    $11.00
  21. Laurent

    SOLD A set of two Neutrik NL4FRX Speakon SPX Right Angle Connectors

    Brand new, sealed a set of two Neutrik NL4FRX speakon SPX Series Right Angle connectors. No soldering needed. All you need is a small Phillips screwdriver! $11 for a set of two. (the picture shows 4 but 2 are sold) Overview Speakon® SPX Series Professional Loudspeaker and Amplifier Connectors...
  22. Mogami 2524 Instrument Cable w/ Neutrik Gold Plugs
    Sold

    For sale Mogami 2524 Instrument Cable w/ Neutrik Gold Plugs

    Hello! This is a listing for a NEW Mogami 2524 Instrument cable (3m-10ft). I am an electronics engineer & making Pro audio cables is my speciality! I ship worldwide. Shipping is included in the price. For making your custom cables feel free to contact me!
    $42.00
  23. electroasim

    SOLD Mogami 2524 Instrument Cable w/ Neutrik Gold Plugs

    Hello! This is a listing for a NEW Mogami 2524 Instrument cable (3m-10ft). I am an electronics engineer & making Pro audio cables is my speciality! I ship worldwide. Shipping is included in the price. For making your custom cables feel free to contact me!
  24. J

    Lightweight Class D Rackmount Amp recommendations!

    Hey guys! 90 seconds into my Saturday night gig, I blew up my Hartke LH-1000: doh! Thankfully I had a spare HA3500 on hand, and ran my SVT VR 8x10 cab off of it for the gig. It performed admirably! This got me thinking, though, as this is the 2nd LH-1000 that's failed on me (first one the...
    • jbassist1
    • Thread
    • amp class d lightweight neutrik power amp pre amp rackmount recommendations sansamp svt
    • Replies: 0
    • Forum: Amps and Cabs [BG]
  25. Brand new 3' Neutrik Speakon speaker cable, in sealed pack
    Sold

    For sale Brand new 3' Neutrik Speakon speaker cable, in sealed pack

    Brand new Neutrik Speakon 3' speaker cord still in sealed pack. $20...shipping $3 conus, Paypal is fine.
    $20.00
  26. MasterBass!

    SOLD Brand new 3' Neutrik Speakon speaker cable, in sealed pack

    Brand new Neutrik Speakon 3' speaker cord still in sealed pack. $20...shipping $3 conus, Paypal is fine.
  27. 3' Canare / Neutrik SpeakOn Cables
    Closed

    For sale 3' Canare / Neutrik SpeakOn Cables

    In my spare time, I like to make cables. What can I say, it's therapeutic. Currently, I have two that I just finished. Being a stickler for quality, I use only the best -- Canare 4S11 14-gauge 4-conductor cable and Neutrik 4-pole connectors. I currently have black in stock but Canare also...
    $29.00
  28. teej

    For Sale 3' Canare / Neutrik SpeakOn Cables

    In my spare time, I like to make cables. What can I say, it's therapeutic. Currently, I have two that I just finished. Being a stickler for quality, I use only the best -- Canare 4S11 14-gauge 4-conductor cable and Neutrik 4-pole connectors. I currently have black in stock but Canare also...
  29. jsf729

    Neutrik vs. 1/4" cabinet jacks

    I was looking through the manual that came with my 1997 Eden D210XLT. It has 1/4" parallel jacks and a Banana Plug (!) input. They highly recommend using the Banana Plug instead of the 1/4" because there is "more surface area". I rarely need- if ever- to use 2 cabinets. The Banana Plug is a PIA...
  30. MascisMan

    Neutrik TRS Jacks with non-TRS cables

    I am currently setting up a Temple Audio board. I want to use these jacks: TRS Locking Connector However, I am unsure if they will work with standard, mono cables for an in (to board) and an out (from board to amp). Will non-TRS cables work with locking TRS jacks like these?
  31. Damani311

    Having a serious problem with neutrik speakon connectors...

    Was using cheap cables with no issues, one finally died to decided to upgrade to neutriks So far I've tried 4 different cables, and all of them don't make a proper connection. Unless you basically hold the connector at an angle I get no sound. Not sure what to think, definitely something...
  32. Godswarrior31

    *Takes deep breath* Need 1/4" bass cable advice...

    I've read several of the posts debating cheap vs. expensive cables etc. That seems to quickly become a war of words. For my own purposes, I bought an Asterope cable and a/b'd it against Livewire premium, Mogami Gold, and some old Monster cable, and I couldn't tell the difference. I really wanted...
  33. Neutrik NA4LJ Speakon to 1/4" Adapter
    Sold

    For sale Neutrik NA4LJ Speakon to 1/4" Adapter

    More from the parts drawer... Neutrik NA4LJ Speakon to 1/4" Adapter New in package $10 shipped ConUS with PayPal
    $10.00
  34. Burwabit

    SOLD Neutrik NA4LJ Speakon to 1/4" Adapter

    More from the parts drawer... Neutrik NA4LJ Speakon to 1/4" Adapter New in package $10 shipped ConUS with PayPal
  35. Rapco Speakon Cable and adapter
    Sold

    For sale Rapco Speakon Cable and adapter

    Rapco Speakon cable (3') with Neutrik speakon to 1/4 adapter. $18.00 for all CONUS SHIPPING ONLY and no trade please.
    $18.00
  36. LennyJ

    SOLD Rapco Speakon Cable and adapter

    Rapco Speakon cable (3') with Neutrik speakon to 1/4 adapter. $18.00 for all CONUS SHIPPING ONLY and no trade please.
  37. PAngell44

    Markbass Neutrik Question

    Hi, I read a couple of old threads that mentioned similar issues, but they were several years old, and I didn't want to resurrect them. I have had several Markbass amps for a number of years. I have one of the original CMD-121p combos, a newer CMD-121p with the Little Mark III heads in it...
  38. T

    Need some education on Neutrik cables.

    Not familiar with them at all. Been running a basic 1/4 from the SVT to the 8x10. But, I am interested in these Neutrik cables. I assume they lock in better but is there a difference in the sound quality or tone?
  39. Hopkins

    Switchcraft vs Neutrik

    I've been using Switchcraft output jacks since I have started tinkering with guitars years ago. Their quality is outstanding, and they are very heavy duty, but they are a bit expensive. Since I usually buy 10 to 20 jacks at a time I decided to try out these Invalid Link Removed phone jacks. At...
  40. Pedaltrain Jr. w/ Mono Club bag and Neutrik feedthrus
    Sold

    For sale Pedaltrain Jr. w/ Mono Club bag and Neutrik feedthrus

    Great shape! Besides being a little dusty the board is in amazing condition, as is the Mono. No dings rips, tears on either. Both near new. I installed panel mount in and outs on it to have more options with pedal placement and because I think it looks cleaner. Custom labels will come with the...
    $175.00
Top Bottom
Back