plek

  1. 2017 Spector Euro 4 Gloss White
    Sold

    For sale 2017 Spector Euro 4 Gloss White

    This is a 2017 Spector Euro 4 in the one and only gloss white. 99% sure these limited runs had solid maple body wings like the US Kramer NS2s we all love. Just got this PLEKd by The Guitar Guys in Ohio who did a fantastic job. This one has stock electronics with the trim Tonepump preamp. I...
    $1,700.00
  2. Fender PB-70 Precision Bass Neck Plek Japan
    Sold

    For sale Fender PB-70 Precision Bass Neck Plek Japan

    1997-2000 Fender Crafted in Japan Precision Neck. Shows dings/wear but plays great and frets were pleked February 2025 at Wood Street Guitars in Oakland. I would rate a C cosmetically. This is a rare neck because the thinner nut, slimmer profile and 7.25 Radius for a Precision neck. Price...
    $550.00
  3. 2014 G&L JB
    Sold

    For sale 2014 G&L JB

    Hey Talkbass, Have a very good condition 2014 G&L JB up for sale. Has the active EMG X series JAX Alnico V magnet pickups installed. Versatile range of tone options with no noise. Pickups are currently set at 3mm gap (low E string) for a warmer vintage tone. Can easily raise pickup height to...
    $1,300.00
  4. 4StringTheory

    For Sale 2014 G&L JB

    Hey Talkbass, Have a very good condition 2014 G&L JB up for sale. Has the active EMG X series JAX Alnico V magnet pickups installed. Versatile range of tone options with no noise. Pickups are currently set at 3mm gap (low E string) for a warmer vintage tone. Can easily raise pickup height to...
  5. 2016 G&L L-2000
    Sold

    For sale 2016 G&L L-2000

    Very good condition 2016 G&L L-2000, with the factory K-spec modification option. Plek era (2014-2017) build with a flatsawn maple neck and rosewood fretboard. The neck has a very smooth feel overall and very comfortable fret work. Transparent Honeyburst color on swamp ash body that weighs...
    $1,350.00
  6. 4StringTheory

    For Sale 2016 G&L L-2000

    Hey Talkbass, Up for sale is a very good condition 2016 G&L L-2000. Has the factory K-spec modification option. Plek era (2014-2017) build with a flatsawn maple neck and rosewood fretboard. The neck has a smooth feel overall and comfortable rounded fret ends. Honeyburst color on swamp ash...
  7. InfinityJaco

    Warwick Infinity nut and fret replacement opinions

    Looking for repair input as I take my Warwick Infinity LTD 2001 in for some major repairs and setup at Mike Lull’s shop - the fingerboard needs re-planing due to some odd wood warpage on the lower fretboard and it will be Pleked with new frets. This has been an issue since I got it over 20...
  8. Sandberg California TM5
    Sold

    For sale Sandberg California TM5

    For sale is a Sandberg California TM5 made in Germany. The PLEK'd frets have minimal fretwear, and overall the body and neck are all in excellent condition. There is a significant amount of fine scratches on the pickguard as shown in the picture. Here are some quick specs: Alder body, Pau...
    $1,600.00
  9. Ninjaterrapin

    SOLD Sandberg California TM5

    For sale is a Sandberg California TM5 made in Germany. The PLEK'd frets have minimal fretwear, and overall the body and neck are all in excellent condition. There is a significant amount of fine scratches on the pickguard as shown in the picture. Here are some quick specs: Alder body, Pau...
  10. Sire U5 (2nd gen) shortscale bass, plek'd and barely used, now $475
    Sold

    For sale Sire U5 (2nd gen) shortscale bass, plek'd and barely used, now $475

    Price drop: $600 --> $475 I had my eye on getting a Sire U5 short scale bass for a long time, but vendors always seemed to be out of stock, or I'd miss brief windows of availability. Last fall one showed up on chicagomusicexchange.com, so I nabbed it. It looked great, but the fret ends were...
    $525.00
  11. frustum

    SOLD Sire U5 (2nd gen) shortscale bass, plek'd and barely used, now $475

    Price drop: $600 --> $475 I had my eye on getting a Sire U5 short scale bass for a long time, but vendors always seemed to be out of stock, or I'd miss brief windows of availability. Last fall one showed up on chicagomusicexchange.com, so I nabbed it. It looked great, but the fret ends were...
  12. Lakland 44-64 GZ Neck - Mint/Brand New
    Sold

    For sale Lakland 44-64 GZ Neck - Mint/Brand New

    $500 Shipped Mint/Brand New Condition. Maple Neck with Ebony Board. This neck has never been mounted. Will need mounting holes drilled but they are pre-marked by Lakland. I was going to replace the neck on another bass but decided not to. This is an amazing neck and anyone that is familiar...
    $500.00
  13. markbmbass

    SOLD Lakland 44-64 GZ Neck - Mint/Brand New

    $500 Shipped Mint/Brand New Condition. Maple Neck with Ebony Board. This neck has never been mounted. Will need mounting holes drilled but they are pre-marked by Lakland. I was going to replace the neck on another bass but decided not to. This is an amazing neck and anyone that is familiar...
  14. archisland

    I tried something that I’ve never done before this weekend…

    I went and got a PLEK. Here’s how it went: (Spoiler: I liked it!)
  15. P

    Bass Infatuation, dead note notwithstanding

    It's almost perfect! Built of stuff ordered from Ebay, a lot of it from Red China. Pre-finished paulownia body, J-bass neck with white binding strips and black dots (very important for low-light visibility), lightweight tuners, Babicz bridge (to get the necessary string height, since the neck...
    • philtronics
    • Thread
    • custom dead notes dimarzio home made light weight p-bass plek precision bass relentless
    • Replies: 20
    • Forum: Basses [BG]
  16. Killing Floor

    PLEK My Nut - P Bass Cutting Video Hot Action

    Last month I received my 2021 P from Fender Mod Shop that checked all the boxes but the nut had some issues causing a buzz that couldn't be resolved with adjustments. I took my handle to Straight Frets here in Austin and they cut a new nut on their PLEK. Here is the video of the process along...
  17. 1966 Inspired Jazz Bass Parts Build
    Sold

    For sale 1966 Inspired Jazz Bass Parts Build

    Here I have a parts build jazz bass that is inspired by a 1966 Jazz Bass. It has a neck that was made by Dan Ransom of San Francisco. The specs are exact to a 1966 Fender Jazz bass, as I took neck measurements from a real 1966 and gave Dan the specs. The neck finish is a nice satin finish that...
    $850.00
  18. Bass4ThePublic

    SOLD 1966 Inspired Jazz Bass Parts Build

    Here I have a parts build jazz bass that is inspired by a 1966 Jazz Bass. It has a neck that was made by Dan Ransom of San Francisco. The specs are exact to a 1966 Fender Jazz bass, as I took neck measurements from a real 1966 and gave Dan the specs. The neck finish is a nice satin finish that...
  19. PRICE DROP!Lakland 2019 Custom 55-02
    Sold

    For sale PRICE DROP!Lakland 2019 Custom 55-02

    Made in November 2019 literally in as close to new as you’ll find. Hi, selling the Lakland Skyline 55-02 custom . Ice blue metallic finish with beautiful block inlays and with this one at a weight of 9lbs 2ox! $1400.00 shipped CONUS Comes with a virtually new Gator Transit Gigbag! ( Will...
    $1,375.00
  20. Rapisme

    SOLD PRICE DROP!Lakland 2019 Custom 55-02

    Made in November 2019 literally in as close to new as you’ll find. Hi, selling the Lakland Skyline 55-02 custom . Ice blue metallic finish with beautiful block inlays and with this one at a weight of 9lbs 2ox! $1400.00 shipped CONUS Comes with a virtually new Gator Transit Gigbag! ( Will...
  21. Warwick Pro Corvette 6 bubinga (German) + aguilar DCB + case
    Sold

    For sale Warwick Pro Corvette 6 bubinga (German) + aguilar DCB + case

    A great German build Warwick Corvette Bubinga $$ (double humbucker) 6 strings with Aguilar DCB pickups (original MECs included) and hardcase. Specs: - Bubinga body - Ovankgol neck - Wenge fretboard - Recently Pleck'd frets - Aguilar DC pickups (includes the original MEC pickups) - Warwick 2...
    €899.00
  22. NicholasBT

    SOLD Warwick Pro Corvette 6 bubinga (German) + aguilar DCB + case

    A great German build Warwick Corvette Bubinga $$ (double humbucker) 6 strings with Aguilar DCB pickups (original MECs included) and hardcase. Specs: - Bubinga body - Ovankgol neck - Wenge fretboard - Recently Pleck'd frets - Aguilar DC pickups (includes the original MEC pickups) - Warwick 2...
  23. JtheSnakeB

    Just had a PLEK done at Wolfe Guitars in Jupiter FL

    If you live in Florida and need a PLEK job I recommend the guys at Wolfe Guitars. Had my Gibson EB Bass plekked and it plays much better now. I was able to drop the action a bit more to my liking. The bass also seems to have a slightly smoother tone. These guys are also a pleasure to deal with...
  24. Schecter Stiletto Session 5 PLEK'd EMG PJ
    Sold

    For sale Schecter Stiletto Session 5 PLEK'd EMG PJ

    2nd Owner. Original owner purchased from Sweetwater and paid to have it PLEK'd. Nice and comfy playing bass. 8.5 lbs, 35" scale, EMG B64 preamp and EMG40P5 (neck) and EMG40J (bridge). Quick connect so you can swap in any 40 size pickup. Currently strung with DR Black Beauties. I do have a set of...
    $429.00
  25. krovx

    SOLD Schecter Stiletto Session 5 PLEK'd EMG PJ

    2nd Owner. Original owner purchased from Sweetwater and paid to have it PLEK'd. Nice and comfy playing bass. 8.5 lbs, 35" scale, EMG B64 preamp and EMG40P5 (neck) and EMG40J (bridge). Quick connect so you can swap in any 40 size pickup. Currently strung with DR Black Beauties. I do have a set of...
  26. Vinnie Boombatz

    Classic 70's Jazz (MIM) impressions after PLEK...

    Got my Classic 70's Jazz back from the shop today. It's a 2008, and I picked it up pretty darn cheap ($350) from a guy moving out of town and needed some cash. It has a few bumps and bruises, but I love the neck profile and the way it feels, and the thing sounds surprisingly good and the low E...
  27. Btbp

    Any negative Plek experiences?

    I have a bass that is Pleked, and it's great, but it came that way. I've been thinking to get my trusty old bass Pleked for the first time, and thought I;d check here is anyone has done this and regretted it.
  28. nonohmic

    What % of the value of your bass would you spend on repair/setup? AKA Plek?

    I have a vintage white Squier Matt Freeman Sig that will be with me forever. Without getting into the whole Squier Fender thing, this bass fits me like a glove and I love it. EMG Geezers in there and Chromes and it thumps. And the neck feels amazing. But! I can't quite get the setup exactly...
  29. 80's Spector NS2A - EMG, Plek
    Sold

    For sale 80's Spector NS2A - EMG, Plek

    Bought an expensive bass so I am moving a couple basses to help cover the blow to the finances. This is an 80's Spector NS-2a in great condition. I took photos with the flash that makes it look much worse than it is. It is actually quite presentable with the worst being some buckle scratches...
    $650.00
  30. ModulusFan

    SOLD 80's Spector NS2A - EMG, Plek

    Bought an expensive bass so I am moving a couple basses to help cover the blow to the finances. This is an 80's Spector NS-2a in great condition. I took photos with the flash that makes it look much worse than it is. It is actually quite presentable with the worst being some buckle scratches...
  31. 2nd PRICE DROP $775 Lakland DJ4 Daryl Jones 2012 7.8 lbs.
    Sold

    For sale 2nd PRICE DROP $775 Lakland DJ4 Daryl Jones 2012 7.8 lbs.

    $775 shipped CONUS. PayPal only. Very low miles never gigged. No finish swirl, very clean, no problems, most excellent player and tone machine. I'm going 5 string. No case. 7.8 lbs. Plek'd 5-8-2012. No trades please, need cash for 5'r. $725 if you pick up local. Paypal only.
    $775.00
  32. tubestuff

    SOLD 2nd PRICE DROP $775 Lakland DJ4 Daryl Jones 2012 7.8 lbs.

    $775 shipped CONUS. PayPal only. Very low miles never gigged. No finish swirl, very clean, no problems, most excellent player and tone machine. I'm going 5 string. No case. 7.8 lbs. Plek'd 5-8-2012. No trades please, need cash for 5'r. $725 if you pick up local. Paypal only.
  33. jongor

    Do Plek machines slot bridge saddles?

    I have a newish G&L JB 4 string that was factory Plek'd. Since I got it I've noticed the E string sounds a bit different from the other strings, a bit more twangy, less solid fundamental. Looking closely at the bridge today I see deep grooves cut in the saddles for the string to ride in. The E...
  34. AB Nate

    Plek in Canada

    This plek system sounds pretty amazing. Any word of someplace in Canada doing this?
  35. brutuscheezcake

    Does PLEK fret dressing work?

    Hey Guys, So I just got my recently acquired 1973 Fender Precision bass back from SF Guitarworks. I asked them to drop in a set of Aguilar 4p-60 pups, sand the finish off the back of the neck, and a set of TI flats. This bass is a basically unused "closet classic" just short of full "collector"...
  36. Gibson Thunderbird Short Scale
    Sold

    For sale Gibson Thunderbird Short Scale

    This is a fresh from the shelf, bought before three moves and stored safely away for five years Gibson Short Scale Thunderbird from the limited production in 2011. This one was built on April 4th of that year and is in near perfect condition. This link (identical the earlier one) will take you...
    $1,000.00
  37. DWest1981

    SOLD Gibson Thunderbird Short Scale

    This is a fresh from the shelf, bought before three moves and stored safely away for five years Gibson Short Scale Thunderbird from the limited production in 2011. This one was built on April 4th of that year and is in near perfect condition. This link (identical the earlier one) will take you...
  38. kumimajava

    PLEK for a Modulus neck (without truss-rod)

    I've acquired a pre-trussord Modulus Sonic Hammer, and I'm getting some fret buzz. Upon a quick look, there are some frets that aren't level - and given the age of the bass (20 years?) I suppose it wouldn't hurt to have them levelled. I'm still new to the bass, and don't have the stones to try...
  39. CrashClint

    GOT PLEK? Roscoe Does!

    My Roscoe LG3005 had a little buzz in the upper register so I carried it to Roscoe Guitars today. The buzz was coming due mostly to the string height being insanely low. When a guitar player says your strings are low, your strings are low. Keith put it in the PLEK Station and ran the program...
  40. Mike Lull P4 black on maple precision bass
    Sold

    For sale Mike Lull P4 black on maple precision bass

    Selling my Mike Lull P4. I bought this on TB and owned for about a year. I've played and loved it a lot. It's the bass I am playing in my avatar pic. Here is the thread where I purchased it SOLD - Mike Lull P4 - 1.75 nut - Maple neck on ash body - Mike's custom Fralin pickup - Protec...
    $1,395.00
Top Bottom
Back