• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Schroeder Cabinets ... smart design = very compact ! (regular and lights)

Status
Not open for further replies.
learning_towalk said:
Can somebody please describe the 1210 to me?

Well it looks kind of like a 2x10 or 2x12, maybe a bit more than half of my Goliath 4x10, an inch or two wider, not quite as deep. Covered in the black carpet (like my SWR cabs) with some blue fibers embedded in it, looks cool. Chevron corner protectors, recessed handles on the sides, perforated metal speaker cover, "Schroeder" insignia plate on the front top, and large rubber feet on the bottom (I didn't order the casters). Input and output quarter inch and speakon connectors, and a tweeter output control. Construction appears to be rock solid. It's a dense cab, heavy for it's footprint (Jorg says it's 47 lbs.) but lighter and easier to handle than the Goliath and SOB 1x15 I usually use (my guitarist said my rig looks like a refrigerator).

My 4x10 is a sweet cabinet, I always thought my basses sounded like individuals through it, nice crisp highs, punchy in the midrange and good low end. Problem was I had to turn the tweeter control almost all the way off, turn down the high end on the amp and cut it on the bass; just too much on the high end for my taste. The Schroeder doesn't have this problem. What is does is lots of thick bottom that isn't muddy. My jazz really comes through the mix, and at low volumes too. Articulate, clean and with lots of muscle in the lower registers and a defined sound that isn't lost on the upper part of the fretboard. This is what struck me the most; clear power, and cut anywhere you play. No dropouts or 'lost' notes. Jorg has a winner, a truly 'tuned' cabinet.

What people haven't mentioned (except maybe for SMASH?) is the value here. You get a great combination of features, including size, power, great sound, excellent quality, a f@#%in' ten year warranty to the original owner for $599 shipped. I REPEAT, FIVE FREAKIN' NINETY NINE SHIPPED! You can (and have from the length of this thread) talk all day about specs and power ratings and response curves. The point is there are all kinds of speaker manufacturers that make good products. If they didn't no one would buy them and they wouldn't be in business. IMHO, this a solid, professional quality product, with the potential for wide appeal to working bass players everywhere. Is it the best ever? I don't know, I'm not an expert and I haven't tried everything. Someone will surely buy one and not like it. But I think most players will want to keep it.

I know I'm keeping mine. :D

My only issue is that I'm not used the the size yet. My other rig has the 4x10 on the 1x15 so it's closer to my head and I can get a good stage sound. If you like your sound, you play better. The 1210, if sitting on its rubber feet, is down low and I haven't gotten comfortable with the stage sound yet. I have had musicians/bassists/fans tell me it sounds great out in the audience so that's a plus. I'll have to keep experimenting with stage placement.

Any of you are welcome to come to my house and try it as much as you want.

learning_towalk said:
is it similar in sound/feel to a 210/115 set up or what? i am very interested in this little box (if only it were 8 ohm so I could buy 2)

I don't see how you will need two. If you need that much volume, you should probably be going through the PA. Or buy the 410 or one of the bigger cabs.

Hope this helps.
 
Blueszilla said:
This is what struck me the most; clear power, and cut anywhere you play. No dropouts or 'lost' notes. Jorg has a winner, a truly 'tuned' cabinet.

Definately... I'm really digging mine! It's a keeper for sure.


Blueszilla said:
a f@#%in' ten year warranty to the original owner for $599 shipped. I REPEAT, FIVE FREAKIN' NINETY NINE SHIPPED!

I just found out last night that the pricing structure is changing. Jorg is going to go through Dealers/Retailers after NAMM so everyone should be able to get them locally at the finer bass stores :hyper:
 
SMASH said:
What about some padded covers for these ... any plans that way?

:D I've got a stylin purple duct tape over heavy clear sheet plastic cover the Mrs's made me the other day while I was working :D

She knew I was looking to have a rig cover made but funds are not allowing it for the next couple weeks or so.

So she went to Walmart and picked up 4 rolls of "limited edition" purple duct tape... she kicks @$$ :bassist:
 
James Hart said:
:D I've got a stylin purple duct tape over heavy clear sheet plastic cover the Mrs's made me the other day while I was working :D

She knew I was looking to have a rig cover made but funds are not allowing it for the next couple weeks or so.

So she went to Walmart and picked up 4 rolls of "limited edition" purple duct tape... she kicks @$$ :bassist:
You, Sir, have found yourself a keeper! That was very thoughtful of her!
 
:D

Jorg, I was just starting High school back then... so it'll take the Mrs and I a while to catch up to you and your Mrs :p

tombowlus, I actually gave up playing (I got fed up with musicians in general and the local scene) and sold my gear not long after I started dating her... she was mad that I did, but understood. Everytime I gave the slightest thought to playing again, she gave me a shove. So she is the reason I'm back playing :smug:
 
James Hart said:
tombowlus, I actually gave up playing (I got fed up with musicians in general and the local scene) and sold my gear not long after I started dating her... she was mad that I did, but understood. Everytime I gave the slightest thought to playing again, she gave me a shove. So she is the reason I'm back playing :smug:
Well, my wife "tolerates" my playing in a band (two bands, actually), moreso than she supports it. However, I do think that if I was out of a band, she would realize how much I miss it and would encourage me to get back into one. But as I said before, you are a lucky man (and so am I!).

And congrats to Jorg! I can imagine that starting up this business has been stressful, so having a supportive spouse can make all the difference!
 
tombowlus said:
And congrats to Jorg! I can imagine that starting up this business has been stressful, so having a supportive spouse can make all the difference!

Thanks for the well wishes, Tom. I can gladly state that this cabinet project is not as much stressing me as my law practice; quite opposite, I love it :D

James;

Same here. Had to quit playing for 12 years, but my wife always encouraged me to get back. When I finally did (also thanks to my son, who has his own band now) I realized what I've missed. Music definitely makes you free :)
 
I've taken the plunge. The check will be in the mail as of Saturday or Sunday, or something... I'm kind of lazy. I can't wait to get the 2 1210's... I think these should be loud enough for my purposes :bassist: I plan on running them in stereo from my QSC PLX, and then ditch that rig for an iAMP800 so I can run at 2 ohms bridged for 1,000 watts total. Mmmmm :hyper:
 
Ericman197 said:
I've taken the plunge. The check will be in the mail as of Saturday or Sunday, or something... I'm kind of lazy. I can't wait to get the 2 1210's... I think these should be loud enough for my purposes :bassist: I plan on running them in stereo from my QSC PLX, and then ditch that rig for an iAMP800 so I can run at 2 ohms bridged for 1,000 watts total. Mmmmm :hyper:

The iAMP800 goes down to 2ohms? Sign me up!!!!! Ranks #4 for me at basstasters.com. BTW, is it stereo?

I'm about to take the plunge myself, but I'm goin wait it out a little longer for some more updated reviews. I know most of you don't like to mix cab brands, but I'm thinkin' 1210 (or 21012) + Bag End S15B-D would be killer!!!! They might call the EPA. :D
 
Ericman197 said:
I've taken the plunge. The check will be in the mail as of Saturday or Sunday, or something... I'm kind of lazy. I can't wait to get the 2 1210's... I think these should be loud enough for my purposes :bassist: I plan on running them in stereo from my QSC PLX, and then ditch that rig for an iAMP800 so I can run at 2 ohms bridged for 1,000 watts total. Mmmmm :hyper:


I'd be very interested in your review of both these setups. Which PLX? I have a 1602/grand prix rig as well as an iamp800 and I'm torn between the 2 using my epifani 210 and 115. The PLX definitely gives me more punch and thump but then again it's twice as much power. Would be curious to hear how they stack up together with the the Schroeder 1210s in tandem!
 
Status
Not open for further replies.

Latest posts