For the fretless guys......
Recently put this together:
Body from yeldarb69's ReBop MM.
Neck from ebradfordrich..
Gold hardware from various places including an older full brass/matte Euro bridge. All hardware on this bass was originally black.
The body looks black in the pix. It looks more like an extremely deep blue in person.
Here is the original neck with brass nut installed by me:
I was able to use my Schaller tuners (normally too small for ReBops) through an old trick I use, but found out something curious (the hard way).
FYI: Real GB7 tuners don't work on these either (slightly too big). It seems the GB7 "looking" tuners Spector is puting on these are the same ones as the Legend series....and are slightly smaller than real GB7's.
After my brass nut installation and setup, the ReBop MM was playing so well I was reluctant to do the fretless switch. But that single MM pickup just lends itself so well to the fretless growl. But after the switch and installing/filing a regular graphite nut (a brass nut, while great for a fretted bass, makes absolutely no sense on a fretless) I'm happy to say this may be the best sounding and playing fretless I've ever laid my hands on.
Mwaahhh for days...everywhere on the fingerboard!
The reason I was considering leaving the ReBop MM as is was that I had also acquired this:
I at first thought, due to the JJ route and fully rounded contours, that this was originally suposed to be an NS-2-JAR reissue. But the dimensions of the bridge route fit only one bridge in the Spector history: The Hipshot B 5 hole Fender version. Plus, since the body is solid Maple, the only thing that fits all the parameters is the discontinued USA NS-2J-FM (2002-2009).
The neck pocket is slightly different than the Rebops (a hair wider and slightly deeper front to back)(not sure about the US bolts), but nothing a slight shim couldn't make work well. This may be a project for a later date.
Anyway, lovin' this fretless.....and I didn't spend $3000+


Note:
I'm not nuts about the EMG BQC (Volume, stacked treble/bass, stacked parametric mid) control pre that came in the ReBop MM.
I may change to a Tone Pump trim to match my other Spectors.
If someone wants to trade, it would have to be with the harness as I need one volume and the two tones. All split shaft.