• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Stoner/Doom Bassists Thread, Part 90: Maxed Out

Anyone use a zoom recorder or use any of their newer iPhone mics? Lookin at maybe picking up a IQ6. I use my phone a ton to catch ideas/riffs/songs and it's always killing the built in mic and levels. Tried the rode app and it helps with the levels but think a actual mic hooked to my phone might help.

Invalid Link Removed

I have a zoom h4n and it works well. Have never been able to make it work as a audio I/f and zooms support is awful be warned.
 
  • Like
Reactions: JoeVictim
so one billion years after starting a band we did a release. enjoy!

a3746700167_2.jpg


http://stonethecrows.bandcamp.com/
 
I worked 7 hours straight, no lunch. More work BS. Got out early to go to periodontist.

Found out it will cost $4k to keep my two, top, back molars. How lovely. I'm broke as shag until we hit the lottery. My wife is about to be forced out of her job because they are going to shift bids and aren't even offering her schedule.

48 hours til Jucifer. Carcass is playing tomorrow. Birthday is Sunday. Birthday money already allocated to bills. Feels like I'm living the doom.
 
My esteemed S/D Brethren, I have a question for you. I just got a Loop Master pedal from the classifieds. It's great! It's more than I intended, but as it was used and cheaper than buying what I NEEDED, I went for it. So, I now have 2 loops of distortion (1 is JohnK Gamma driving my BAT Pharaoh and 2 is B3K driving a Blower Box). Here's the question. What should I put in loop 3? It's designed to switch between loops 1/2 with one stomp, but 3 can be added on top of either one. My two iStomps are currently running in loop 3, but what should they be?

In short, suggest 2 effects that would play well with each other and fuzz or heavy distortion. It doesn't have to be the most useable tone, I'm just wanting fun. Right now, I'm pretty set on Envelope Filter. Anyway, the iStomps have just about every effect, so shoot! Chorus? Flange? Echo? Gonkulator? And in what order? Go!

And thanks in advance!
 
I worked 7 hours straight, no lunch. More work BS. Got out early to go to periodontist.

Found out it will cost $4k to keep my two, top, back molars. How lovely.

I work 8 -10 hours errday without a break. But the nature of the job kind of requires it. You get used to it.

Also. I have had all of my back molars removed. They got pretty ****ed up. It was $300 for an extraction, $1200 for a root canal and then another $1000 for the crown or a whole lot more for implants. I chew fine and I make a point to take extra care of my molars if that is any reassurance.
 
My esteemed S/D Brethren, I have a question for you. I just got a Loop Master pedal from the classifieds. It's great! It's more than I intended, but as it was used and cheaper than buying what I NEEDED, I went for it. So, I now have 2 loops of distortion (1 is JohnK Gamma driving my BAT Pharaoh and 2 is B3K driving a Blower Box). Here's the question. What should I put in loop 3? It's designed to switch between loops 1/2 with one stomp, but 3 can be added on top of either one. My two iStomps are currently running in loop 3, but what should they be?

In short, suggest 2 effects that would play well with each other and fuzz or heavy distortion. It doesn't have to be the most useable tone, I'm just wanting fun. Right now, I'm pretty set on Envelope Filter. Anyway, the iStomps have just about every effect, so shoot! Chorus? Flange? Echo? Gonkulator? And in what order? Go!

And thanks in advance!

I'd go with a phaser and/or flanger.
 
My esteemed S/D Brethren, I have a question for you. I just got a Loop Master pedal from the classifieds. It's great! It's more than I intended, but as it was used and cheaper than buying what I NEEDED, I went for it. So, I now have 2 loops of distortion (1 is JohnK Gamma driving my BAT Pharaoh and 2 is B3K driving a Blower Box). Here's the question. What should I put in loop 3? It's designed to switch between loops 1/2 with one stomp, but 3 can be added on top of either one. My two iStomps are currently running in loop 3, but what should they be?

In short, suggest 2 effects that would play well with each other and fuzz or heavy distortion. It doesn't have to be the most useable tone, I'm just wanting fun. Right now, I'm pretty set on Envelope Filter. Anyway, the iStomps have just about every effect, so shoot! Chorus? Flange? Echo? Gonkulator? And in what order? Go!

And thanks in advance!
Both delay. Fuzz and delay. Where is Adam to come in and tell everyone about the gloriousness of fuzz and delay? You got two dirt channels, two delays sounded good to me... Good luck!
 
I work 8 -10 hours errday without a break. But the nature of the job kind of requires it. You get used to it.

Also. I have had all of my back molars removed. They got pretty ****ed up. It was $300 for an extraction, $1200 for a root canal and then another $1000 for the crown or a whole lot more for implants. I chew fine and I make a point to take extra care of my molars if that is any reassurance.
I shouldn't bitch too much. At least I have one job now.
 
I've not heard of that band.

In other news, i ordered an indoor bike trainer yesterday. The plan is to get myself in somewhat better shape before i have to do back-to-back tradeshows in January. There's just so much walking, it would be nice to not be exhausted the whole time.

I already own one of those trainer stands, but my folks have been using it since i was storing it at their house. Figure I'll let them keep it and get another one.
 
My esteemed S/D Brethren, I have a question for you. I just got a Loop Master pedal from the classifieds. It's great! It's more than I intended, but as it was used and cheaper than buying what I NEEDED, I went for it. So, I now have 2 loops of distortion (1 is JohnK Gamma driving my BAT Pharaoh and 2 is B3K driving a Blower Box). Here's the question. What should I put in loop 3? It's designed to switch between loops 1/2 with one stomp, but 3 can be added on top of either one. My two iStomps are currently running in loop 3, but what should they be?

In short, suggest 2 effects that would play well with each other and fuzz or heavy distortion. It doesn't have to be the most useable tone, I'm just wanting fun. Right now, I'm pretty set on Envelope Filter. Anyway, the iStomps have just about every effect, so shoot! Chorus? Flange? Echo? Gonkulator? And in what order? Go!

And thanks in advance!
Phaser! Always Phaser LOL.
 
  • Like
Reactions: Turkeypills
Happy Hollow Wieners day. Hope you all have your hollowed out wieners carved, filled with candles and placed on your porch. Don't forget to set a bell pepper out, so the town children can fill it with sausage and spices for roasting at the big bonfire tomorrow in the town square.
 
Last edited: