Putting money on that? But they are out of order. I’d say from left to right, A, E, G,D.Should be stamped 1 to 4.
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
Putting money on that? But they are out of order. I’d say from left to right, A, E, G,D.Should be stamped 1 to 4.
I’m going A, D, E, G. Tall saddles in the middle. Or did you mean the current order?Putting money on that? But they are out of order. I’d say from left to right, A, E, G,D.
Soft metal like brass will be even easier. Lol, fine. Thanks for that.I just bought some 9mm stainless rod to make a new longer endpin for my half size upright. I drilled a few holes about 3mm deep for the locking bolt to go into. It wasn't as difficult to drill as I thought.
Three 45s here tonight...
View attachment 7164658
stuff still in the car from last last night so by default....
View attachment 7164659
RIP David. Last of the Dolls.Although expected any day, this was still sad to see.
Just saw this. The guy was an Icon. Knew he was in a bad way, but still very sad.
![]()
David Johansen, New York Dolls Frontman and Punk Pioneer, Dead at 75
David Johansen, frontman for the New York Dolls and the last surviving original member of that pioneering punk band, has died at the age of 75.www.rollingstone.com
- JakobT
- Replies: 33
- Forum: Miscellaneous [BG]
GC will pop a pickup out and let you know if it has Epiphone stamped in it.Thanks. There are two Wanderlust green's that I'm looking at. One being the clawless one you posted. There is an intact mint condition used one at GC for $299 that was made in Indonesia. I thought all those were from China and the VPs from Indonesia. The one you saw is up to $175 now.
Yes, hopefully. But I don't know if all are so marked or not.Should be stamped 1 to 4.
Thanks. May do some contacting then. Even if not stamped, I'm thinking they would be a very noticeable improvement.GC will pop a pickup out and let you know if it has Epiphone stamped in it.
I'll check them again, but Ive tried a couple orders. They are also sized for string diameter somewhat, and I thought I had them in descending size order.Should be stamped 1 to 4.
From the reunion show. Killer on a Thunderbird not long before he passed. Always loved the Dolls.RIP David. Last of the Dolls.
From the reunion show. Killer on a Thunderbird not long before he passed. Always loved the Dolls.
From the reunion show. Killer on a Thunderbird not long before he passed. Always loved the Dolls.
Welcome back! You got off easy. Dave leaves the hemisphere and we hit 25 pages before he lands.Wow you take a week off and suddenly you're 25 pages behind...
Ok. You said tone doesn’t do much. Doesn’t cut treble or never has treble?Here is what I can see on the’64 pots:
Volume says EP085 500K 0750 C and the rest is under solder
Tone is either blank or all under solder
Caps are 0.02 at 50v, not sure what the other symbols mean
Update, the 0750 likely means 1967 week 50. CTS
View attachment 7164410
Looks much more like I expected.I found more photos of the 64 cavity and other than the date code (1967) on the volume pot, they look the same. I'm not shocked that a pot would go bad that quickly. A bad solder tech can overheat a pot pretty easily. My 2021 VP had 2 pots go out almost immediately after I bought it.
View attachment 7164435
And that’s with me telling y’all to stop posting!Welcome back! You got off easy. Dave leaves the hemisphere and we hit 25 pages before he lands.