• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Dylan, Lucinda and John Doe — what a show!

I also saw the show at the Greek and had a somewhat similar take. I really enjoyed Dylan and was initially struck by how different Lucinda’s voice is now compared to how she sounded on all her great records from earlier years. She’s still a tremendous talent and her band was excellent. John Doe didn’t really do anything for me.
My daughter and SiL went to the Berkley show too. They had very different reactions. She loved Dylan, liked Lucinda ok, but did not care for John Doe.
If I had the chance, I would have been very happy to see Bob, just to say I had.

Web presence and content

It sounds like you just need an online presense to host your content and video.
You are not looking to compete with bar bands who want to hover up all and any gig.
Its a fine line because mostly you need to ignore their venues, but at the same want the better outdoor gigs.
I'd get yourself a very good agent and let them do that work but you'll pay 20% ...

The whole deal is who is putting your band out there. If you stick with low key gigs, no one sees you and its a long process.

The other thing is, you need people wanting to see you..which is on you..rather than being a band in the corner.
  • Like
Reactions: tothemax

Sire M Series Bass Club

Anyone else having issues with a warble above the 12th fret on the b string? I’ve been able to almost dial it out of the other strings but I can’t seem to get rid of it on the b string without lowering pickups too much.

It’s a stock m5 5 string without added copper shielding and a plek job (neither helped warble, but fixed noise and helped playability). It’s currently wearing labella nickels with all but the b string through the body.

It’s not like I play up there a lot… just trying to make my favorite bass better. Perhaps stiffer strings?

Anyone used the VG-800 and GK-5B on bass?

Thanks a lot for your response, I've put a post on VGuitar forums now to hopefully tap into these people.

The specs say the pickup is only 9mm but not sure how thick the double sided tape is so i might run into problems with the pickguard. That picture of the Stingray looks like there's a lot more space between bridge and pickup...I think the Bongo HH has its bridge pickup much closer to the bridge and so the pickguard is maybe 5 or so mm from the bridge ☹️ I'd totally consider taking off the pickguard but not sure what to do with the screw holes and I haven't checked if the finish is continuous under the pickguard (it's a mantis green Bongo made earlier this year, the mantis green is such a nice colour).

Although I'm not quite in a position to buy the pedal or pickup yet, the more I look into it the cooler it seems!
  • Like
Reactions: sunbeast

looking to get more punch or aggression from my ibanez MDM1605

Ok so after a bit of shaging around i settled on 2 pickup options and 3 preamp options, bartolini ntmb+ or sadowsky preamp with the mid boost switch (still dont know because i like having a good mid control), or any john east preamp (probally the marcus miller one people said it sounds like a sadowsky preamp with a mid control).
The pickups are either gonna be the bartolini b-axis or delano jmvc, couldnt really find a comparison between them, theyre both not polite and agressive which i like but can also be versatile when needed

Light stiff vs. heavy flexible

To me, it's the bass that chooses the strings.

I've never (knowingly) played Alice strings as I've never been to Wonderland, but Roto flats are generally pretty stiff IMO. They do sound magnificent when other people play them, as far as I'm concerned.

My preference for strings is on the heavier side, regardless of stiffness and low action is a must.

Sometime in the near future I'll have to try the Dogal Hellborg rounds and may find myself eating my words if they end up behaving the way I believe they will, but for now...it's what I've written above.

Experiment and enjoy.

Supporting member seeing ads?

I'm not sure if you were using an ad blocker before, but the gold level has always been the membership with no ads. We've used this setup for years. We tried a different ad provider in June but are back to the usual as of June 29th. The ad free subscription is new, and meant to be a low cost option for people who don't need to sell in classifieds.

Thanks Paul. I don't what the deal was but it seems to have solved itself. There may be a small ad here and there but that doesn't worry me. It was ads that would start playing videos automatically. Could have been something on my phone. Thanks again for letting me know.
  • Like
Reactions: paul

Peterson Tuner - Setup with Bass Sweetened Tuning?

What made the midpoint of your string change between standard tuning and sweetened tuning?
Honestly? I can’t rule out operator error. I just know that it seemed really fiddly to try and get strings sounding right until I went back to the factory setting on the tuner. I haven’t tried again, but hey, maybe for science if I’m bored some weekend…

Replacement Bridge on Acoustic Bass

I have the same problem. The big problem for me is inaccurate intonation. All my other electric basses have adjustable for and aft movement for accurate set up, this thing is like a cheap kids toy. I also find the preamp hard to see and difficult to dial in a sound that fits a kick drum like my solid Fenders. All in all I think I fell for a Fad.

G&L SB1 Pickup Concern

No, because one side of one of the two coils is going directly to the output- grounding the series connection will single that coil out (one end to output, the other to ground).
Yep. I was thinking about the diagram wrong. You are still shorting both sections of pickup to ground, but on one of them you still get signal that way (it needs to go to ground to get signal, but you end up doing it through shielding instead of through the intended route; either way = signal, should be lower signal from running just that half due to losing series from the dropout on the other half).
  • Like
Reactions: sunbeast

Genz-Benz GBE 750. Is it still a good amp?

That IS the LED, there is no cover.

Qualified service centers in AU/NZ that I can support:

Australia/New Zealand:
Peter Van Kuyk
[email protected]
Weka Electrical Repairs Ltd
3/26 Quebec Rd
Milford
Auckland 0620
MOB: 021 02521256


Australia/New Zealand:

Warren Brown
[email protected]
Brownout Musical Equipment Repair
1/34 Jindalee Road
Port Macquarie
NSW 2444
Phone: 04 38861006
Phone: 02 65813565
That IS the LED, there is no cover.

Qualified service centers in AU/NZ that I can support:

Australia/New Zealand:
Peter Van Kuyk
[email protected]
Weka Electrical Repairs Ltd
3/26 Quebec Rd
Milford
Auckland 0620
MOB: 021 02521256


Australia/New Zealand:

Warren Brown
[email protected]
Brownout Musical Equipment Repair
1/34 Jindalee Road
Port Macquarie
NSW 2444
Phone: 04 38861006
Phone: 02 65813565
Thanks to your insight, Ihad another look and saw that the LED had just been pushed back in to the case. So a little push and it was back, good as new. Thanks!

Kala UBass Megathread, Part 7

I've been through a lot of trial and error with hollow body U-Basses. I have a fretless that came with white strings. I tried red, brown and gray strings. The intonation changes depending and I ended up back with the white strings which have the best E. With piezo pickups volume between strings has been an issue. I then bought a 2nd U-Bass with frets, a Rumbler and put on nylon/steel flat wounds. The QA on this one wasn't so good. The 5th -7th frets were high and in order to level them I had to file off about half of the hight. Since I don't live in the US sending it back wasn't an option. The 9v Fishman pickup had more headroom than the 6v, but the string to string volume was not good. So being a luthier, I started with improvements. I've always played basses with 1.5" nuts so one thing just lead to the next:
pulled the frets and leveled finger board
reshaped the neck
installed medium frets
refinished the neck
It really played well and the neck was much more to my liking, however the string to string volume was still an issue so:
installed a Telecaster size rail pickup in a mahogany sound hole cover, and made a compensated brass saddle. Then I could wired the grounds of the under saddle piezo and magnetic pickup together. I glued a booster ceramic magnet on the 15k ohm pickup since the nylon core strings only have the steel wrap.
The string volume is good and the piezo pickup works as a tuner ;-)
Outstanding work. Kudos.

Clive Davis, RIP

Clive Davis was arguably the most powerful figure in the music industry. A lot of people don’t know that Arista also released a lot of very successful soundtracks: The Bodyguard, Waiting To Exhale and Boys On The Side were just some of the significant soundtrack albums Arista released in the nineties (and which took the careers of Whitney Houston and her alleged cousin, Dionne Warwick, to the bank, as both were signed to Arista).

Fodera in Gospel

The old Patitucci video from the 90s has a really good segment on string muting. In essence he uses his non-plucking plucking hand fingers to mute the low strings near the bridge and the palm from his fretting hand to mute the rest. I apply it though nowhere near as effectively…
I mute with the pinky on my plucking hand. Works better for me than floating thumb muting. Of course, I'm only playing a 4 string.
  • Like
Reactions: DJ Bebop

Latest Classifieds

Excellent
$950.00
Location
Milwaukee Wisconsin, United States
Hi and Lo band Studio grade comp
$325.00
Location
Maryland, United States
For sale Empress Reverb
Top Notch reverb way too much on tap for my use
$285.00
Location
Maryland, United States
Brand new, only played for maybe 2 hours. I don't have the original packaging. They are barely cut, tons of room for multiple wraps on a P-Bass...
$68.00
Location
Austin Texas, United States
Just got this….have always wanted to try one. Amazing reverb for bass. Gonna stick with my old faithful verb. $255 shipped in the US. Just...
$255.00
Location
New York, United States

Filter