not working

  1. P

    Frustrated! Need some veteran help please

    Long story short I recently purchased a Squier Affinity PJ bass. Unfortunately, I didn’t check it thoroughly before making the purchase, so when I got home I found out the tone knob does not work at all. They said to bring it back in and they would fix it. They told me a new tone knob was on the...
  2. TheSeagoats

    My head kicked the bucket today

    I have (had?) a Carvin BX700 that hasn't had a ton of wear because I got it shortly before I quit my last band in 2017. Ever since the pandemic I haven't really played much at all. Today, I went to show my wife something about different tones and when I turned the head on it was crackling, even...
  3. S

    Issues with the 4th fret (first string) on my electric bass guitar

    So I bought an Ibanez bass guitar not too long ago, and I have a fender mustang Lt50 amplifier, but recently I noticed the 4th fret of the first string has been going in and out on certain settings, and some it's quieter than the other strings, I'm not sure whether it's the bass or the...
  4. P

    Double Bass Bass doesn’t work

    Hello I acquired a second hand Stagg electronic double bass, but I cannot put it sounding. It has the battery, but I cannot hear with hear phones or with the amp. The amp works with the bass. What shall I do? Thanks
  5. S

    Wonky (maybe resistance) issue with pickups

    I bought myself a used Les Paul Special II bass this summer, and did some stupid modding. Went Guitar Fetish, and ordered a guitar sized humbucker neck position hot rail, and a guitar sized humbucker bridge lipstick pickup (I wanted to get a really weird variety of tones from this thing.) Got it...
  6. Santos sampang

    My active preamp isn’t working....

    so i bought this bass cort c5 plus and when i first used it i used it on a tiny 10w guitar amp ... i played it on active for like 2 minutes and it stopped working... the passive works fine but the active doesn’t work.... can it be the fault of the amp or is there something wrong with my...
  7. JT Wolbert

    Pickup not working(strange),Preamp broken?

    My friend and I had both our basses(powered pre-amps) at my house and his guitar kept having issues. His yamaha was very quiet and kept making distorted noises. We changed cables/batteries/amps with no improvement. He said that his guitar was working fine earlier today. So then we switched to...
  8. G

    Bass Microsynth Not Working

    Hey guys, so I have had this issue with my bass Microsynth that I have not ever seen before. I have not seen anyone have this issue yet... When I'm playing a continuous chord progression the BMS filter keeps sweeping even though my start and stop frequencies are set to the same frequency. Like...
  9. smeet

    Videos not working for me on iPad?

    Embedded videos just look like stills. It’s been for a few days, didn’t even realize they were videos till now. It still works fine on my desktop Mac and iPhone but not on the iPad.
  10. D

    SWR Goliath SR 610 - Input Module

    I need my fullrange input module replaced or repaired on my SWR Goliath Sr 610. See pics. Does anyone have one? Or, Where can I get a replacement, (does not need to be OEM)? Or, who can I send the input panel to for trouble-shooting and repair? I did not know the church flooded and the speakon...
    • Duncantein
    • Thread
    • 4 ohm 4 ohms bass cabinet electrical input not working repair swr swr goliath sr
    • Replies: 36
    • Forum: Amps and Cabs [BG]
  11. D

    410 TVX Peavey stopped making sound

    Hello there! I have a 410 TVX cabinet and a Firebass 700 head (both Peavey) I bought them used almost 2 years ago and all had been well! The other day I was practicing and at one point it stopped passing sound. I tested my head and speaker cable on another cab and found nothing wrong. For good...
  12. gary mitchell

    Aguilar Twin Filter is not working out so far.

    I just can't get a good wah sound from it. I put it in front middle back of my chain, my chain consist of a Boss Geb-7 a Dallas arbiters fuzz, a Keeley Bassist compressor limiter, Boss DD3 delay and the Aguilar Filter Twin. I 've have change position of each pedal everyway I can, I have eq the...
  13. Joe Ricardo

    Sansamp VT Bass DI not working

    Hi i bought a Sansamp VT Bass DI only a few months ago and have have only played it half a dozen times and now it's broken. The pedal now has terrible background noise when i turn the effect off - it's still on in the background and makes a loud hissing sound. It's a real shame because i loved...
    • Joe Ricardo
    • Thread
    • bass di di not working sansamp vt vt bass vt bass di working
    • Replies: 1
    • Forum: Effects [BG]
  14. D

    Deluxe bass big muff pedal not working

    Alright, so first of all, sorry if I'm posting this in the wrong place, but I just got this pedal (used from reverb, but the seller had great reviews) and it doesn't seem to work. The crossover light comes on but no matter how I turn the knobs, it doesn't affect my tone at all, and with the...
    • DunderThunder
    • Thread
    • bass big muff bass pedal big big muff deluxe muff not working working
    • Replies: 6
    • Forum: Effects [BG]
  15. B

    Digitech BP-8 not working

    My BP-8 has just stopped working. When I turn it on, the green “program” led is on, and I get all sorts of different combinations of other lights. (See photos) The foot switches do nothing, and although it recognizes the signal, I don’t get any sound to the amp. Has it gone to a better place?
  16. C

    Bartolini NTMB+ into Lakland 4401 - not working.

    Hi all, I have a 4401 and I'm trying to upgrade the preamp to the Bart NTMB. So when finally rec'd, I looked at the existing wiring, and saw it had way many more wires than the Bart install. Bart support said I needed a 25k ohm volume pot, got one. Connected all the wires per their diagram...
  17. Hd0521

    Mid control not working.

    I have a sunn concert bass head (red face) With the mids dimed and the bass and treble at zero there is a very low volume tone coming through. If I back the mids down to zero the volume of that tone doesn’t change. If I dime either bass or treble the volume increases. I’m assuming it’s a passive...
    • Hd0521
    • Thread
    • amp bass amp control head mid not working sunn working
    • Replies: 2
    • Forum: Amps and Cabs [BG]
  18. Gatlin

    M87 Not Working

    So I have had an MXR M87 for about 6 months now. I have love the pedal and it stays on 100% of the time. Recently though during practice my bass all of a sudden had no audio. After some trial and error I realized it was the M87. So for practice I took it out of the effects chain and rocked...
  19. J

    Schecter Stiletto neck pickup not working - please help

    Hi, I got a stiletto for basically nothing and it is in pristine condition except that the neck pickup does not seem to be working. The blend control blends OK to the bridge pup but when I turn it to the neck position I gradually lose volume until where it is supposed to be 100% neck the bass...
  20. Rev. Cornelius

    Pages never stop loading, *AGAIN*

    I noticed this a day or two ago. The little blue wheel continuously spins at the top left corner of the page. It is doing it right now. It is like the page will not finish loading. While this is happening, the back button does not work. Anybody else? Thanks
  21. Jam119

    TC Electronic Corona Chorus SCF limited edition not working with battery?

    just picked up the pedal used as it was in great condition. Two gigs later I notice it wouldn't power on with a new battery in. It's very intermittent. But it does power up with power cord attached. Anyone experience this proble and have suggestion? Thanks.
    • Jam119
    • Thread
    • battery chorus corona corona chorus edition electronic limited limited edition not working tc electronic
    • Replies: 2
    • Forum: Effects [BG]
  22. Ampeg SVT Classic (Not working)
    Sold

    For sale Ampeg SVT Classic (Not working)

    I will try to make this long story short. This was purchased from a friend who was in the music retail business. This amp was in storage for 10+ years. When I bought it, he told me he wasn't even sure it worked. I paid $300.00 for it. When I tried it out at my friends' house who had an SVT...
    $300.00
  23. B

    SOLD Ampeg SVT Classic (Not working)

    I will try to make this long story short. This was purchased from a friend who was in the music retail business. This amp was in storage for 10+ years. When I bought it, he told me he wasn't even sure it worked. I paid $300.00 for it. When I tried it out at my friends' house who had an SVT...
  24. CaneyBoniface

    Push Pull Volume pot not working well

    hey there, Im from Malaysia. i need help, why my volume pot (push/pull) are not mute when i turn it off 0%
  25. S

    Double Bass G string not working...

    I have a Fujiyama FB-10L - I realize it is not a high end unit but it was very inexpensive when I bought almost two years ago and had no issues then. I am not a bass player first, so it spends considerable time 'resting' in between plays. The last time I played it was in the fall of last year...
  26. WebJunk

    Tone Control not working on Squier Jazz bass

    I have a Squier Jazz Bass. Everything else works but the Tone Control does nothing or next to nothing. I got it completely stock, as the guy I got it from (who was new to playing) only played it a few times and never knew the tone control didn't work. Tested the pot and it is fine. 250k pot...
  27. Creation Audio Labs Grizzly Bass - LEDs not working
    Closed

    For sale Creation Audio Labs Grizzly Bass - LEDs not working

    Picked this up here in the classifieds here awhile back. Great pedal, but recently the LEDs quit working. Everything else seems to work OK. I have contacted Creation Audio and found out that even though it is under 1 year old, I would have to pay a repair fee (since I am not the original owner)...
    $120.00
  28. jakka1

    No longer available Creation Audio Labs Grizzly Bass - LEDs not working

    Picked this up here in the classifieds here awhile back. Great pedal, but recently the LEDs quit working. Everything else seems to work OK. I have contacted Creation Audio and found out that even though it is under 1 year old, I would have to pay a repair fee (since I am not the original owner)...
  29. M

    Ibanez SR 1805 electronics aren't working (/w photos)

    Hi everybody, I recently bought an Ibanez SR 1805 Premium bass which I absolutely love! Since I bought it in used condition and didn't have the chance to try before buying, I noticed that the electronics aren't working as they are supposed to and I'm whondering what might be the issue. According...
  30. Z

    Hohner "The Jack" bass. Active pickup system not working.

    So earlier today i bought this Hohner "The Jack" 5 string as a bass for tracking (If anybody has gotten any information on these basses at all i would love to hear it). I got it second hand for 570 dollars, so of course it wouldn't be in perfect shape. One of the features of the bass that i...
  31. M

    Help! Ampeg v4 stopped working

    Hey everyone tonight my ampeg v4 blew out i had it hooked up to my svt 4x10 using the proper ohms as ive done many times mid song it just cut out no hiss hum or anything does anyone have an idea on what this could be?
  32. M

    Ashdown Little Giant 1000 channel not working

    Hey guys I've had one of these amps for about 4 years or more now, and although the gross overestimation of the power is irritating, it's been a good piece of kit. Recently however, one of the speaker channels has to stopped working. Now all I get from this channel is a hum. Could anyone tell...
  33. M

    Ashdown Little Giant 1000 channel not working

    Hey guys I've had one of these amps for about 4 years or more now, and although the gross overestimation of the power is irritating, it's been a good piece of kit. Recently however, one of the speaker channels has to stopped working. Now all I get from this channel is a hum. Could anyone tell...
  34. wisconsindead

    Volume Pot Not Working - Decreases Treble but not Volume...

    Hey guys, I just put in a new pot into my bass (Guild Starfire). Its just one pickup and one pot for volume. I thought I had it set up right but now it is acting weird. I did about the best solder job of my life on it. But when I roll the volume pot all the way back it just removes treble but...
  35. PDavis

    Neck pickup not working -- Batteries?

    Hey guys, Got a Dimension Bass today from Amazon. The neck pickup did not work. It is a 2015 and one of the batteries was corroded. I didnt have 9volts to test but is that typical for an 18volt system or am I going to have to get under the hood and check the wiring? The warehouse deal was...
  36. bassgrackle

    Focusrite Scarlett 2i4 not working with MacBook Pro

    I have a 2014 MacBook Pro and a Focusrite Scarlette 2i4 that is around 5 or 6 years old. When I plug in the lights on the interface blink and the only sound is a clicking. Has anyone else had this problem, if so how did you solve it?
  37. Levi Kramer

    Tone knobs not working properly

    Hi, I have a question about the knobs on my 1963 höfner 185. They behalve pretty strangely and I would like to know if there's a way I can fix it without bringing it to a repair shop. There are a lot of stances on which the bass loses either almost all volume or all tone. And for all knobs but...
  38. Passinwind

    Image linking not working properly

    For last day or two when I attempt to link images on my own web server I am just getting an IMG tag and nothing else. Here's the end result: https://www.talkbass.com/http:/passinwind.com/Tech/KL3015LF_vs_3015_infEAR_55Hztuning.PNG and here's what shows up in the BB Code editor with URL tags...
  39. Johnny Mac

    TC Spectracomp not working with Powerfactor 2

    I previously contacted TC Electronic customer support regarding this issue, but I've experienced this issue with two separate Spectracomp pedals so thought I'd ask you fine folks to see if there's a solution. The pedal is not saving Toneprints after the power is cut. I can upload one to the...
    • Johnny Mac
    • Thread
    • not working power power supply spectracomp supply tc electronic working
    • Replies: 12
    • Forum: Effects [BG]
  40. C

    Genz Benz 900 Streamliner Amp not working

    Last night my Genz Benz 900 quit working. The Red LED Protection light stays on. I checked the internal fuse and it was good. I tested the tubes and they were good. There are no obvious damaged parts, the fan works and all tubes light up. I have contacted KMC Music with no reply yet. Does anyone...
Top Bottom
Back