Separate names with a comma.
I sanded the neck of my kit guitar this evening. I started with 180, then did 220, 320, and 400 dry. It went surprisingly quick... less than 45...
Hi all, I'm currently restoring on old Schecter Jazz. The 2 pickups have scratched pole pieces. I'm wondering how I can get these smooth again....
Does anyone have a file ready to go...to make a 12" radius sanding block on a CNC router. So ... something like a .stl file? The CNC router I...
I posted on this site a few months back asking about endpin extensions or extra long rods to be used with my little Engelhardt M3, but I've since...
Somewhat pointed question, but in working with this fingerboard I have successfully clogged up paper on both a sanding planer and an oscillating...
Hey, I have a 3mo old Fender Dimension bass (under warranty) and the neck feels like it has little things stuck to it that roll along the neck as...
Spraying nitro lacquer finish on my neck. Noticed that there's some spec's of dust in the top of finish. Am i good to lightly sand it off after a...
OK guys, i've sanded off the decal for my Squier VM bass VI and plan on fitting a custom made decal. Where i've sanded off the decal i've sanded...
I'm currently working on a Queensland Maple bass, and I'm having a devil of a time trying to sand out the end grain scratches. Is there a magical...
I hope this is the right forum for this post. I have for sale a Luthier's Friend sanding station. This tool allows you to use a drill press as a...
Hi, I've been thinking of sanding down the bridge on my bass. The action is quite high, and the adjustment wheels (I don't know if they have a...
I have an epoxy coated fingerboard which was in gloss but I buffed down to matte some time ago. I just did a few passes with some grey...
Hey hello, I have a 30" handmade fretless bass (nothing special, it was done by some local luthier as one of his first attempts) - it used to be...
To keep a long story short, at some point I want to strip/sand down a Kubicki and repaint it. Where it has chips around the edges it appears that...
I'm working on a Chris Squire tribute bass (not a Ric, it's an old Kay 20-B) and I'm going for the two tone headstock look. I masked it up and...
I have given my steel strings a light sanding every year or so with a fine steel wool to clean them and make them uniform. The other day I was...
Hi guys, I have got a 2003(?) MIM Fender Jazz 60s Reissue, and a 2012 Indonesian made Lakland 55-02. I have been slowly getting a little...
Hey bass dudes, I recently put a fretless Squier neck with an ebonol fingerboard by Squier on my jazz bass. I'm getting some nasty buzz around...
Hey TBers, I have been playing with some de-waxed shellac (1.5 lb cut) on a couple projects of mine (basses and general woodworking). I have been...
