Post Your Pedalboard - Part I

[xan]

i know its been discussed before, but id really like something like that dirtbox.. pity theyre out of business.

 

[TaySte_2000]

Ah sorry I misunderstood you.

My signal Chain is

Barber LTD Overdrive into
Catalinbread Teaser Stallion into
Zoom Ultra Fuzz into
Dirtbox with 4 effect loops setup

Loop 1 is Dod fx25 into Crowther Prunes and Custard into 18v Danelectro Cool Cat
Loop 2 bypasses all other loops and is just clean incase things start going wrong.
Loop 3 is MXR Bass Auto Q into Aria FL-10 Flanger into EBS Bass IQ
Loop 4 is one of the Dirtbox's distortion channels I usually set this for a very high gain

This then goes out into the Line 6 Echo Park theninto the Boss DD-20 then into the Maneco Nanolooper 32 and then into the EBS Multi Comp (Set for 2 band compression) then into the MXR M-80 Bass DI (Set up for a 2 clean channel operation) and the parallel out goes to the Boss TU-2 tuner so that that isn't in my signal chain at all.

There quite simple really

 

[sean_w_mcgrath]

I leave my amp flat sometimes plugging into the effects return on the amp bypassing all the eq.

You can do that?!?!?! Is that something that can be done with every amp, or is it a special feature? Just curious cause i never heard of that being done before.

 

[TaySte_2000]

All amp's with effect loops can do this.

 

[Tecx]

Not all Steve... Some amps have pre/post eq/preamp effect loops, some just have pre, some post... So, its all up in the air...

All amp's with effect loops can do this.

 

[Funkzfly]

Everything is in loops on the Dirtbox. Basically.

Hey, a Manchester man! Not too far away from ya in Liverpool. Got a lot of relatives living over there though.

 

[33degrees]

hey!
im from Essex but now i live in Paris. i thought this site was full of yanks!

 

[Toasted]

There's a small yet hardened contingent of Europeans on here

 

[xan]

and a couple of aussies thrown in the mix.

 

[33degrees]

 

[Tecx]

AND a few Canucks, or a british blood canuck like me...

and, now for somthing comp-leatly different: Pedalboards!

and a couple of aussies thrown in the mix.

 

[lowmid]

and of course, some belgians, just to provide some nice beer!

 

[bassman314]

Don't forget about the Americans that understand we aren't the center of the universe...

oh wait.. that's most of us

ONTO PEDAL BOARDS..

 

[Toasted]

Link Removed
Link Removed

Back on track. I was so happy i almost died when this came.

 

[Craggsy]

Thats the best pedal board ive seen so far! Simple yet powerfully.

No really, have you got all the pedals you need to finish it? I mean i say finish, but do you really ever have a finished pedal board, i dont ever seem satisfied with mine.

 

[Adam Barkley]

Link Removed
Link Removed

Back on track. I was so happy i almost died when this came.

Interesting place for a rackmount tuner.

What happened to all the killer pedals you used to have?

 

[johans]

i've never seen anything mount like that

anyway
sure you'll get a clear tuning from that view point

 

[Toasted]

I wanted my rack tuner on my board. So i had the manufacturer knock up a flexible rack mount system for it. I've still got a fw of those "killer pedals" abark. I'm just hiding them from you until i get a few more things sorted out. Then i can do a "grand reveal" on my board. It'll blow some minds

 

[Petary791]

I wanted my rack tuner on my board. So i had the manufacturer knock up a flexible rack mount system for it. I've still got a fw of those "killer pedals" abark. I'm just hiding them from you until i get a few more things sorted out. Then i can do a "grand reveal" on my board. It'll blow some minds

I think your board now is already kickin'.

 

[bassisten]

Hi guys!


My beloved effects-board... check it out!



From top left:

Cioks Big John psu.

Line6 DL4, delay and looper.

Expression-pedal for DL4.

Ernie Ball Volume Pedal.


From buttom left:

EHX Holy Grail, reverb.

T.C. Electronic Chorus+, chorus & flanger.

T.C. Electronic Booster+, dist/booster.

Boss 7-band EQ.

EBS Octabass (not on picture!)