Dropped right on, no inserts. There is a tension screw to make sure they don't slide around.Very cool. Did the knobs fit the EMG pots right away or did you need to use an insert?
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
Dropped right on, no inserts. There is a tension screw to make sure they don't slide around.Very cool. Did the knobs fit the EMG pots right away or did you need to use an insert?
Hi everyone, I'm planning my next Schecter 5 string move, but I have a hard time deciding. One thing I keep on reading on forums is that Schecter has been raising their prices but that on the newer instruments one gets less quality than in the past. Wondering what you guys' take is on the quality of the basses below; I'm considering getting either a Model T5, a Stargazer 5 or a JB 5. I have one of the older Stiletto Elite 5's (as pictured), and I have to say it's a hell of an instrument for the money I paid ($390 used; I then put in active EMG's and they rock!). Don't know whether the Korean vs Indonesian production matters. Thank you for your time!
View attachment 7194022
I played one today and it felt great despite the 38mm nut not being my preference, sounded great, looked just as bad in person as it does in photos. Really too bad.I agree. If the front of the bass would look like the back side it would look so much better!
I also wish they would put covers on their house brand pickups....
Before I go cross-eyed trying to find a review in this group, can someone point me to a review of the MA-4 and/or 5? The specs on the body, neck, and string spacing seem very Ibanez-y but adult sized.
Hey there party people, can anyone tell me is a Seymour Duncan soap bar pickup would drop into a stiletto extreme? I’m thinking about swapping the stock pickups out.
NIce work! Sounds like a successful project.Replying to myself? Lame, I know. But I just wanted to answer this question for any future searches. Yes, the Seymour Duncan soap bar pickups drop right in, no problem. They sound great!
Now for the problem, I wanted to convert it to passive while I was changing out the pickups, so I ordered a V/V/T harness from Fat Bass Tone. The first volume pot did not fit through the existing hole for the old blend pot. I just had to drill it a little bit bigger and it slide through.
The other variable, which took me a little bit to figure out was, following the wiring instructions from the pickups led to them being out of phase when both fully on. I just had to switch the wires on the bridge pickup and was good to go. Conveniently, the Fat Bass Tone harness was solderless, so I just had to use a tiny screw driver. Took less than two mines.
Now I've got a passive stiletto with Seymour Duncans and it sounds great. I was thinking about getting a new bass, but I think this will put that on hold for a while. Still learning the sweet spots on the pickups and controls, but I don't think I'll miss the preamp.