• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Thunderbird Club

LOL - that was at my last house (in Kentucky). I finished off a 1500 sqft basement as my guitar and bass room - complete with pool table, full wet bar, poker table, a theater with a 12ft diagonal drop down screen and projection TV, a fitness room, a wood shop, and bathroom. Sold it in 2012. It just went back on the market again…
1076 Colina Dr, Villa Hills, KY 41017 - 4 beds/6 baths
photos 21-29 show most of the basement area I finished (I did everything except hang the drywall).
Wow houses are cheap there! Anywhere in greater Sydney that would be at least AU$3mill possibly up to AU$7mill. NB I am not a real estate agent nor have played one on TV.

(Yes we are having a housing affordability crisis at the moment.)
 
Got this ‘71 already butchered.
There’s a rout in the neck position under the pick guard for a humbucker.
And the bridge position which you can clearly see what I have in there.

When I got the bass, the original neck had issues.
So replaced it with an AllParts neck, which is only a temporary fix, and replaced the p-pup, and bridge pup.
Bass weighs around 8lbs,
and sounds killer.

I anticipate some other mods to come.
With no further routing.

View attachment 5132222
Why is the Allparts neck a temporary fix if it plays well and sounds great?
 
I believe that the structure matters (neck through vs set neck vs bolt on). I believe that the structure of a particular piece of wood (or other material used for instrument construction) may cause it to dampen string vibrations or not. I haven’t seen or heard of any complaints about the pine bodies on Fender AmPro II Jazz basses. To go back to Leo, he started using rosewood fretboards not because of any potential acoustic properties, but because a rosewood fretboard wouldn’t show grime and dirt like maple.
Physical materials are interesting. Three trumpets made within minutes of each other at the same factory will all sound different let alone 3 basses made out of trees.
Absolutely. And they will sound a little different tomorrow than they do today, even in the same room with the same amp and all the same settings.
 
I love all Tbirds, but I really love the reverses; Mike Watt's comes to mind immediately...

Kind of like this blue one, it's a Non Reverse.:)

USHpKv3.jpg
 
Next on the exam table, an ‘02 Ibby Ergodyne EDB 500. SIT Power Steels and getting my Mesa rig saved this from being sold as I now get a decent tone out of it. I gave it a dusting today and put a new battery in it. It didn’t need any other tweaks. This is a very comfortable bass to play even though the luthite body is relatively heavy. It is well made by Cort from Korea.
IMG_3089.jpeg
 
Not Thunderbirds,
But tonally inspired by,
View attachment 5132785
'99 Fender Hot-Rod Precision, overhauled by the late, great Mike Lull back in '14.

View attachment 5132791
'16/'17 Roscoe Standard LG.
Gotoh tuners, Schaller bridge, Stonewall pickups.
Master volume, master tone, 3-way mini switch for pickup selection.
Awesome my friend! I take it that those are amazing Lull pickups? The color is fantastic.
 
Wow houses are cheap there! Anywhere in greater Sydney that would be at least AU$3mill possibly up to AU$7mill. NB I am not a real estate agent nor have played one on TV.

(Yes we are having a housing affordability crisis at the moment.)
I hear ya. That same custom built home on the same size lot on a lake here in SoCal would have easily topped $3Mill here in Thousand Oaks, and closer to $5mill in a beach town like Malibu or Carmel. Like I said, you get a lot for your money there.
 
Wow houses are cheap there! Anywhere in greater Sydney that would be at least AU$3mill possibly up to AU$7mill. NB I am not a real estate agent nor have played one on TV.

(Yes we are having a housing affordability crisis at the moment.)

That Kentucky house is listed for approx AU$1.3m. Did a quick google.
Read this and weep, or at least look at the photos and read the captions. :)

Most shocking property sales of 2022: Sydney dumps sold for over $1m - realestate.com.au

(Admittedly, prices have cooled a little since that article, after 12 consecutive Int Rate rises. But not by a whole lot)
 
Not Thunderbirds,
But tonally inspired by,
View attachment 5132785
'99 Fender Hot-Rod Precision, overhauled by the late, great Mike Lull back in '14.

View attachment 5132791
'16/'17 Roscoe Standard LG.
Gotoh tuners, Schaller bridge, Stonewall pickups.
Master volume, master tone, 3-way mini switch for pickup selection.

Finally!! Someone with Stonewall pickups!!! Please tell us about those!!
 
Finally!! Someone with Stonewall pickups!!! Please tell us about those!!
To my ear, they are on the quiet side, WRT output.
But that's what volume controls/boost pedals are for.

Tonally, they lean towards darker/warm side of things. However, that's with it's current strings, which are some pretty worn boomers.
I bet some fresh steels would brighten them right up.


Overall, I'd say good pickups.
But for me, I've been spoiled by the Lull T-Bass pickups in my Fender.

Before the Stonewalls, the Roscoe had a bartolini T4CBC. I actually prefer the bart over the Stonewall WRT tone and output.
 
To my ear, they are on the quiet side, WRT output.
But that's what volume controls/boost pedals are for.

Tonally, they lean towards darker/warm side of things. However, that's with it's current strings, which are some pretty worn boomers.
I bet some fresh steels would brighten them right up.


Overall, I'd say good pickups.
But for me, I've been spoiled by the Lull T-Bass pickups in my Fender.

Before the Stonewalls, the Roscoe had a bartolini T4CBC. I actually prefer the bart over the Stonewall WRT tone and output.
I have set of those Barts. One is in my J shaped object.
 
Sorry to repost the VP, but wanted to consolidate all three versions. VP with SIT Power Flats, CP with EBCF, and IV with La Bella black tapes. I am thinking that the CP fits best. On the other hand, all three are neck PU only and tone rolled off. So, I know that is going to minimize differences, but still think there is a bit.





 
As an eBay Associate, TalkBass may earn a commission from qualifying purchases.
LOL - that was at my last house (in Kentucky). I finished off a 1500 sqft basement as my guitar and bass room - complete with pool table, full wet bar, poker table, a theater with a 12ft diagonal drop down screen and projection TV, a fitness room, a wood shop, and bathroom. Sold it in 2012. It just went back on the market again…
1076 Colina Dr, Villa Hills, KY 41017 - 4 beds/6 baths
photos 21-29 show most of the basement area I finished (I did everything except hang the drywall).
Beautiful place. You (and the Misses) seem to have really good taste in all things. I question moving from Kentucky, but no body's perfect!:laugh: