Search results for query: *

  1. Jimg5512

    Sterling by MM Stingray sub pickup wiring

    Need help, I have a MM Sterling Stingray Short Scale passive bass, the stock pickup has 4 wires, looking to upgrade the pick up.... I tried a Seymour Duncan SMB-4A same color wiring as stock. , just replaced color by color and the pick up does not work. The included semantic looks to be...
  2. Jimg5512

    The Acoustic Club

    I love my gear, use some conf just about every weekend. The 360 is my fav... but use a 370 with a 406 most of the time...
  3. Jimg5512

    MID PUNCH - Basses to investigate

    Guys, I have tried all kinds of basses in an effort to get more mid punch off stage. I use an EDEN WT800 and two 4x10XLT's... My Sadowsky NYC never quite got me there especially when engaging the pre-amp. My Geddy Lee with upgraded pubs (Damarzio 126's) no luck, P-BASS good with SD 1/4...
  4. Jimg5512

    THUNDERFUNK 550

    Thanks I have found one in good shape, maybe a 7 out of 10 for $470... Cool, thanks again for the info, it helps!
  5. Jimg5512

    THUNDERFUNK 550

    Just checking... what would be a good price for used one of these, maybe 5/8 years old, give or take a few years... Works great, has some signs of cosm ware... Any Ideas?
  6. Jimg5512

    The Acoustic Club

    Use my gear just about every weekend... Can't beat the punch (if you are a clean player then you will love the mids). People on other threads slamming the 370? Don't understand the logic, RMS in the past was just not calibrated like it is today... My 370 from a volume standard point destroys...
  7. Jimg5512

    70's Acoustic 370 into a Eden 410XLT @ 4 ohms

    Hey MaCcartneyman, FYI - the 370 was developed for the passive 301 folded horn 1 x 18 cabinet... not the 408 4 x15 cabinet.
  8. Jimg5512

    70's Acoustic 370 into a Eden 410XLT @ 4 ohms

    Attached is a link for the spec's of the Acoustic 370... Link Removed I know it states 130 RMS at 4 ohms... I use one of these all the time and I can tell you, using two 2-15 cabs each at 4 ohms - that's a 2 ohm load to the head is the cleanest loudest bass amp I have ever owned. Way...
  9. Jimg5512

    Whats best cabinet for Eden Wt800c???

    Yo, I have a WT800 and use two Eden 4 x 10 XLT's... I run the rig mostly flat - enhancer at maybe 9:00 o'clock, boost the low mids a bit... she sounds perfect and has never let me down! Congrats, WT800 is a classic amp!
  10. Jimg5512

    Neck Profiles - Thick Vs. Thin - What's your preference?

    Yamaha - Motion-MB II -fastest, most comfortable neck of all time! There's none better! If you can find one, it's the design!
  11. Jimg5512

    The Acoustic Club

    Hey there, Used my 360-361 last night (Blues band gig)! I had it tuned up a few weeks back, completely gone thru and it's 100%... I just love this thing, the 18 does rock the mids nicely! Nothing like this thing! :hyper: bump to Nicktej22 - very cool!
  12. Jimg5512

    The Acoustic Club

    Hey, Used my 360361 last night (blues band)... what a great rig. I had it all tuned up in the last year and it's just perfect! What a vib this thing produces! You know the 18 does cut thru nice w/solid mids! Just love this thing! All the best! Bump to Nicktej22 - cool!:hyper:
  13. Jimg5512

    Fender Aerodyne Jazz bass - for sale

    Hi there, Made in Japan - Fender Aerodyne 4 String Jazz Bass . A great bass. The neck is straight with nice action, the frets are in like new condition. Totally stock, looks, plays and sounds great. Includes gig bag. Will ship lower 48 - $600 - Thanks for looking! • Black polyurethane...
  14. Jimg5512

    Show me your vintage Japanese Bass!

    I love this bass, fast... sounds great!
  15. Jimg5512

    My bass gear history. What's yours?

    Hi all, slow day up here in the great Midwest! 1971: Hagstrom 1974: USA (sunburst) Fender P bass 1975: Rick (natural 4001) bought at Mannies in NYC 1976: USA (natural) Fender Jazz bass 1977: Back to a USA 65 Fender P bass 1992: Carvin LB 70 (all back and gold) 1995: Wasburn XB 200...
  16. Jimg5512

    How many amps do you guys own?

    SWR workman 2 -10 combo, not thriled with it, not much tone. However it's small and gets the job done for small gigs. I like to use my Acoustic 370 and 301 bottom for larger venues. I use an EDEN WT 800 and Eden XLT 4-10 for medium size gigs and practice...
  17. Jimg5512

    Cheapest bass you just LOVE

    Yamaha Motion II <$500 in perfect shape... Best live bass ever, lite, sound is awesome thru any rig!
  18. Jimg5512

    The Acoustic Club

    I have a very loving wife... she encourages me to play out more... mum, maybe she has friend named "ramone" ...lol! Thanks
  19. Jimg5512

    The Acoustic Club

    ....lol, I know I don't have a 360, YET!!!!! We have dreams!!!! But coming to an Acoustic site and being given #360, heck! I need to buy a lottery ticket!!!
  20. Jimg5512

    Push/Push pot advice

    Hey guys I too could use some help, I just put in two DiMarzio's 123's into my Jazz and would like opinions on should I change out the 250's for a push/pull set up so that I can run them in either series or parallel? If this sounds like a good idea can you please recommend where and what...
  21. Jimg5512

    The Acoustic Club

    Love this site... great pictures, and overall vibe!
  22. Jimg5512

    Geddy Lee JAZZ upgrade advice?

    Thanks everyone, well I ordered the DiMarzios 123's today, after install I will report back... Thanks again, you guys are great!!!
  23. Jimg5512

    Pickup noise

    Thank you,
  24. Jimg5512

    Pickup noise

    OK, Not sure I can make this request any more clear... I play ROCK, I want to know the best PUPS to use with an ON-BOARD PREAAMP (AUDERE)... I have already tried SD 1/4 POUNDERS (they sound good, bright and growally) but are way to NOISY! I have shielded everything! I am sorry did I...
  25. Jimg5512

    [Minneapolis/MN Thread] Midwestern Comradarie

    New here, I am looking for lesson recommendations, in the south metro... I know my scales and have been playing for 25 years but want to continue learning different techniques, especially related to thumb and slap... any ideas or recommendations for someone, south metro/St. Paul would be...
  26. Jimg5512

    Pickup noise

    Ok, I have like posted this 5 times and have had just one response, is there anyone out there????lol!!!!!!! Need some help... I am upgrading my Jazz bass with an Audere on board pre-amp and need to get some help/suggestions on pups. I am leaning towards the DiMarzio DP-123's due to the fact...
  27. Jimg5512

    Geddy Lee JAZZ upgrade advice?

    Thanks, I have not looked at any BEQ12 because I already own the Audere... I am just looking for some help in determining a set of replacement pups for my GL Jazz... again, I had a set of 1/4 Semor Dunks and they were so noise I had to take them out... any other suggestions.... thanks for...
  28. Jimg5512

    Minnesota Bassist Club

    New here, I am looking for lesson recommendations, in the south metro... I know my scales and have been playing for 25 years but want to continue learning different techniques, especially related to thumb and slap... any ideas or recommendations for someone? Thanks!
  29. Jimg5512

    Best cab?

    How about Eden Cabs...
  30. Jimg5512

    Minnesota Bassist Club

    Hi, My name is JimG5512, Eagan, I am a big Acoustic fan, I play and restore them when I can find them... So can you set me up with number 370 please... Later,
  31. Jimg5512

    Geddy Lee JAZZ upgrade advice?

    Hey everyone, Need some help... I am upgrading my Jazz bass with an Audere on board pre-amp and need to get some help/suggestions on pups. I am leaning towards the DiMarzio DP-123's due to the fact that they are stacked/hum cancelling pups and because I play mostly heavy rock live... I...
  32. Jimg5512

    The Acoustic Club

    Thanks Owl, is my number really 360? How wild is that??? I have found home!!!! lol!
  33. Jimg5512

    The Acoustic Club

    Hey, Sounds like home, can I join? Thx!:hyper: 3 Acoustic 301's 1 Acoustic 320 1 Acoustic 220 1 Acoustic 140 1 Acoustic 200 (slave) 1 Acoustic 406 1 Acoustic 150B and 102 cab Carvin, F-Jazz, Yamaha Motion II, P-bass
  34. Jimg5512

    "J" pickups discussion and comparisons.

    Smash great review and very helpful... quick Q, I have a Geddy Lee early model that I placed qtr pound Semor D's in and added an Audere J 23 on board preamp... I shielded everything with copper tape and I still get a ton of 60 cyl noise. Anything off of center (using both pups equally) is noise...
  35. Jimg5512

    Need Suggestions on Jazz Pickups for a Marcus Miller Signature

    Same here but with SD's qtr pound pups... I have a Geddy Lee early model that I placed qtr pound Semor D's in and added an Audere J 23 on board preamp... I shielded everything with copper tape and I still get a ton of noise. Anything off of center (using both pups equally) is noise city! I...
  36. Jimg5512

    How Much Hum on J Basses?

    Sorry for more of the same questions... I have a Geddy Lee early model that I placed .25 qtr pound Semor D's in and added an Audere J 23 on board preamp... I shielded everything with copper tape and I still get a ton of noise if I adjust any control off of center (using both pups equally) it's...
  37. Jimg5512

    YAMAHA MOTION II BASS QUESTION

    Hey everyone, I picked up an almost new Motion II this past weekend and love how it looks, plays and feels... It's white with the gold hardware... and like I said it's new. When I played it thru this guys small amp it did not sound all that good, but I thought hey, it's got 10 + year old...
  38. Jimg5512

    Me V.S. The Precision Bass

    I have been playing for over 20 years, clubs, live shows recording... you name it. I have had all kinds of basses, original 1976 Jazz, brand new 1979 Rick 4001 set up from MANNY'S in New York, Petula's G&L's, Sting Rays, Carvin's and I always seem to come back to a P-bass. It's like a jack of...