line out

Hej hej, I'm running my bass into an EDB-2 into an active monitor (EV Everse 8). How would I get my signal to the FOH while keeping my personal monitor? Is it possible to use the EDB-2's line out and DI out at the same time? (One for my monitor, one for FOH) The EV8 has an XLR Mix Out to be...

anyone knows how I can add a Line Out to a Fender 25 rumble that didn't come with one built in, I'd love to have it so I can go into my Focusrite via the amp. I've seen tons of "how to's" on how to add an external speaker with a bypass jack, but I want both working. thanks in advance.

Hey everyone, My band is having a rehearsal Thursday to brush up before our Friday gig. It’s a small living room session, 3 piece band of bass, vocalist, and keyboard/ guitar who is also providing drum tracks via the keyboard (sets the loop, then plays keys/guitar to accompany). Issue is, my...

The XLR out to p.a. on my Quilter 800 is tied to my master volume. Of course I'm used to the gain knob of an amp effecting the send level of the line out but never the master volume. Is this something unique to my particular amp or is this by design? And can it be changed? Thanks everybody! :)

Hi, Is the Little mark III line out any good for recording? Thanks !

Hi, recently I tried recording my Markbass amp by plugging an XLR cable to the Line Out DI and then to my audio interface. When I started playing, the audio in my headphones was extremely distorted and it made all kinds of sounds that one could only imagine to be in hell. Could this be a cable...

I have a Orange Ad200 that has no XLR or line out in general and was wondering if there is simple mods to make it so the pre-amp of the Orange is not lost? Any mod at all? I love the amp and want to get that creamy high end. I am splitting the signal with an Avalon U5 for cleans.

I have a Peavey T-Max head and a 210 and 115 cab. However, I need to play sometimes without volume due to neighbours/time/family etc... Is there a way I can use headphones or the DI out of the amp without sending volume to the cabs? I know there is no headphone jack on the amp but I can route...

As the title suggests, this thread is about what works best for you live. Contributing factors could be your bass, your amplifier, size of venue, style of music, what’s equipment is available to you, the sound guy, etc. If you’d like, please also tell us why you prefer this option. I...

Hello, this seems like a dumb question but I just got a new TC RH450 and it comes with both a digital out and a line out. My question is what is the difference between the two? I have a Focusrite Solo audio interface, and I'm not sure which of the amp's Outs I'm supposed to use to connect it to...

Hi all So used bass amps are thin on the ground in my neck of the woods. I see a good price on a Ross RB60, but am struggling to get info online. Does anyone have experience with these? According to what I've seen, it's a combo with a 130W amp and a 60W speaker, with what looks like a 1/4 jack...

I have Googled and found a post on this forum re Rumble line out signal. That was interesting and helpful. That is the problem with the one I have. But I tried to cross check with headphones attached and I was not getting a head phone signal. The headphone jack should cut off the signal to the...

Salut all I am using a cab sim pedal juste after the jack line output of my Gallien krueger MB500. But this output acts strangely Chapter I : Context : A perfect plan for a perfect tone When I play at home I can use the phone output of this pedal, and I've got the tone I like direct into my...

So I acquired a 1969 Ampeg B-25 tube head yesterday because the tone was just too sweet. My needs remain with finding a louder setup. Apparently I am at war with myself on this issue because I went and traded for 50 tube watts, which ain’t so quiet through two 15”s. I guess for small...

Hi, i'm looking into getting my first bass stack for small gigs etc. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The bass amp head i was looking at is: Behringer ULTRABASS BXD3000H Bass Guitar Amplifier Head And For Cabs i was looking at 2 cabinets with 8ohm impedence. The Bass...

I searched the Talkbass archives but didn't find this subject. I have two or three older bass amps that do not have a line out that is before the preamp. They do have post preamp line outs, but I want to also feed my signal to the PA. Using the post line out means that every time I change the...

I purchased a new Fender Rumble 500 combo recently, and when I went to use the line out today the PA was not getting any signal from the amp. I'd like to make sure this is not user error before contacting my local Authorized Fender Service Center. On my prior amp (Fender Bassman 250), I used a...

Hi guys. I own a Gallien Krueger MB200 head, I've seen a few videos of people using this amp through their interface (and I mean not mic'd) and it sounds awesome, such a GREAT tone. But in my case it doesn't sound even close to that. It's not that it sounds bad, it's just that there's not much...

I found a good deal on a Peavey Combo 300 nearby. It seems like a solid loud amp but one thing I'm unsure about is the line out. I don't see an XLR on it but it looks like it has a preamp out. How does one connect the 1/4" line out to a PA system?

Last couple shows I've played that were miked, the soundguys have said that they're not getting any signal out of my transformer bal out. I went home and plugged into my PA and there was signal. Were the sound guys doing something wrong or do you think there is in fact something wrong with my...

Sorry, dumb questions -- Do I use a guitar or speaker cable to go from the line out on an Ampeg B100R to a mixing board? What is the maximum length of cable I should use? I have a Live Wire Solutions PDI Direct Box. Would it be better to use a short cable from the line out to the DI box and...

I've got an old Peavey TNT 115 (manual here) that is wired so the line out is pre-EQ. I'd like to do a bit of home recording but it's annoying having to EQ everything in post when I already have my amp EQ'd how I like. The diagram I attached came directly from the manual on page 8. I can do the...

I always thought line out was just for attaching the speaker to a larger system, but according to a customer service worker from Guitar Center, you can plug a mic into the line out port and your voice would be projects through the speaker. I just wanted to make sure this was true; I'm terrible...

My question to all of you is, do you feel that a studio DI(REDDI, Noble, U5, Radial, etc) will cause a noticeably larger difference over just a XLR out of an amplifier? Or say, the DI out of a tech 21 or dark glass pedal. I'm curious to see what everyone has to say, especially those playing...

So I was working on my new PA this week getting ready for our second show with it, hooked up my RH450 using the line out only and almost no signal. I've had this head for over 3 years and haven't had one issue so I was thinking something was wrong on the PA. Finally I grabbed my Genz Benz 3.0...

Hello TB'rs We (at Church) don't have enough monitors. I was thinking of running the line out/ aux out (all outs except bass) from mixing console to my bass rig. Well, by this, I could hear bass and other instruments through my cab. Signal chain : Bass (Input) and line out from mixer (through...

I searched and found a number of threads about the B100R and one that specifically talked about the Line Out. I didn't find an answer to this, specifically. Can I use the unbalanced 1/4" line out on the B100R as a direct input to a power amp. If so, would a relatively transparent PowerAmp into...

Hi all. I have the ability to purchase a 1 year old BA-112 v2 for $125, which I think is a good price. However, I'll mainly be playing in my church, and I normally use "line out" on all amps into their PA system. I don't see a line out on the new v2's... is there a workaround for this...

I have no experience playing the bass guitar yet but I was wondering if I could play a bass through a Line 6 Spider IV 15 watt guitar combo, without using the speaker cabinet, by using headphones (line out) exclusively. I have a space issue in the room as my drum set and my guitar combo amp take...

I wondering if can be used like a vt bass? Can be pluged in irig hd and use ipad with headphones or similar device? Or need a PA? Needs a common guitar cable? Never used line out, dont want ruin something. Ampeg people can help please.

I joined a band a year and a half ago and every show I've played with them where there's PA support the sound guy insists on having me plug my bass into a direct box to FOH and then I run out from that same box to my amp, meaning my amp isn't in my live tone at all. Is this typical? In my old...

There is a recent thread floating around here somewhere in amps. OP asked for a list of amps that use a tap from the output transformer as the line for the XLR out to the board. A link would be great. I have searched using several different queries with no luck. Thanks!

Hey guys, I'm on the market to buy either a Sansamp or SCR-DI. For all the owners of either out there, what are your experiences running fuzz/distortion (and/or other effects) into your Sans/SCR and taking the line out to FOH? I'm not interested in how the effects sound together, but rather how...

Hey guys, I'm new here although I have searched around on the forums for a few years about other problems I have had in the past. Anyways, for the past few months I have been having issues with my (Balanced Out) input on the back of my B2-R head while playing shows. I have tried to research...

I have been using the Ampeg SCR-DI as a practice amp and on stage DI for over a year. I also have an Ampeg PF-500 head with cabinets for my on-stage or very small gig sound. I normally just run Line Out from the DI straight in the front of the head. I know this is basically running an pre-amp...

My band uses a PA with powered subs and we connect the bass amp to the PA via XLR, between bass amp's balanced line output and our mixing console. It totally works and it seems like the logical way to do it, but I want to make sure we're not missing out on a 'best practice' that might improve...

Can anyone recommend a Bass effects pedal with direct line out, tuner, and controllable headphone output that isn't too terribly expensive? Don't need a lot of fancy extras. Just nice sound, stable accurate tuner, some good EQ's, and a volume controllable headphone output. Will use to interface...

Hi, i have a GK MB500. My plans are to buy a cab in the near future. I'm really getting exhausted of not finding my tone on gigs with other equipment. On many gigs i end up playing other people combos. I have a tone hammer pedal also, so i have tools to achieve my aim, but nothings works better...

Hi Talkbass, I am looking to go the head/cab route in the near future and I want an amp head with a separate line out volume control. I know that Markbass amp heads have them (Littlemark III for example) but I have not found too many others. I run through a PA/Sub and use the amp as an on...

Hi, there, I was thinking of plugging (at very low volume) a GK MB500 into a stereo, on the manual when talking of the line out says "This connection requires a shielded patch cord" then it shows a picture of a 1/4 plug cable with a male XLR cable on the other side. English is not my first...