• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Team Trace Elliott Pt 3

Status
Not open for further replies.
On evil bay $150.00
This is a Trace Elliot Replacement Speaker Celestion 15" TE BS15300-8 T5413.
Tested in the shop and worked well.

Total cost with shipping and fees for this speaker will double the price to 300 Dollar, until its here in germany (suggestted from ebay).

@ Downunderwonder

I removed the speakergrill and measured hight, width, and deepth at the inside of box.
Maybe its 2-3 liter less, didnt care at the moment for the marshallstyle handles, and the sealing of the speakerpanel (1,6 liter).
Im quite not sure if WINIsd calculate /care for the Volumen lost by the Reflex-Ports?


EDIT:

I think im making a big mistake.
Simulated Eminence 3015 "Large Vented Cab" design, where's said to set a highpass by 35Hz, which is way beyond xmax (5,9mm), but not about xlim (11mm).
So its possible to get way better tuning of the cab and much more powerhandling.
I will report again as soon as possible.
 
Finally, a shot of the full stack.
 

Attachments

  • IMG_20140117_193158.jpg
    IMG_20140117_193158.jpg
    44.2 KB · Views: 89
I picked one of these up a long while ago and am getting it over to the repair shop for a cleaning and such. I have been looking high and low for any information on this amp and cannot find anything. This is just the power amp. It has no preamp in it. From what I know is that there are 4-6550 tubes in it and it is rated at 200w, but I have no idea at what Ohms. I think it was made somewhere in the 1990 range, but am not sure about that either.
They were expensive. Somewhere in the $1000 range back in 1990, but again, not really sure.
Can anyone shed some light or any information on this? I did get a service manual from Peavey, but it is mainly for the preamp (same as the G12 pre), but mine does not have a preamp in it. It is just the power amp.
 
I know. Peavey own's the name/brand now. They are who I contacted since they should have had all the paperwork, but they only found schematics on the amp/preamp and the preamp on the Quatra Valve is the GP12

I'm surprised Peavey had anything regarding the earlier period Traces. Guess that goes to show that if you don't ask, you'll never hear "yes".
 
As an eBay Associate, TalkBass may earn a commission from qualifying purchases.
So, I have been buying TE 1048H cab parts from a guy in MD...
I find out, like me, he also has an AH1200SM... I know where 6 are and this might be the 7th... anyone here selling off 1048H parts on evilbay?

So, how many of us have both the AH1200SM and a 1048H? That's probably going to be my dedicated practice rig at a band room I'm setting up with a new band. :cool:
 
There a few 1048 no horn cabs at GC online in the used section.

I have and use AT HOME an AH1200SM, 1048H and a 1518 with a new TE Celestion 500 speaker from BAS.

And...
I'll trade a pre-fender SWR GOLIATH SR 6-10 horn cab for a green carpeted red striped 1048H
 
Status
Not open for further replies.

Latest posts