latency

  1. FretRiff

    Bass to DAW/plugins then reamping to practice amp

    With my eyes glazing over at the variety of choices in the TB Classifieds and at Sweetwater, I'm reconsidering growing a pedal collection for home use, and thinking instead I could send my passive bass signal into my Audient iD4 MKII audio interface, apply effects/plugins loaded in my DAW...
  2. lordradish

    "You need to learn how to play 30 milliseconds early."

    Okay, not sure what to make of this. I've been multitrack recording my jazz trio's performances lately. Everything is mic'ed except the bass, which goes direct. I notice sometimes that something sounds a bit off in a way I can't put my finger on. I'm an experienced player and these guys are...
  3. HOTCARL

    TC Flashback Mini Delay 2 latency issue.

    Hey TBers! I'm wondering if anyone else has run into this issue. After rearranging my pedalboard the other day, my TC FB M2 now has latency from when I pluck a string to when noise is audibly heard through my amp. I have it setup for simple dotted eighth note style play. However, the latency...
  4. NoiseNinja

    Anyone know the latency of the polyphonic 1 oct up effect of the TC Electronic Sub'N'Up?

    Not really because it matters much, as I am extremely satisfied with my TC Electronic Sub'N'Up Mini for adding an always on 1 octave up to my bass signal, giving me an effect somewhat similar to that of an 8 string bass, using a custom made toneprint, based on the "Poly Default" template. But...
  5. Butch Bobcat

    UHF vs 2.4GHz Wireless Unit?

    Okay, so I'm in the market for a new wireless system for my bass. I just sold my Nady UHF-4 which, in 2010, I loved. It worked great! No latency or dropouts. I used it with both guitar & bass gigs. It is in the 900mHz range. When I finally "found" my current bass tone, I noticed that I don't...
  6. SteveCS

    Jamulus, Latency, Timing, Feel and Groove

    I don't know if this is a real phenomenon, something in my imagination, or something else. As with most players, getting together to play, be it rehearsal or shows, has been a no-no recently. Since last summer, following a false start with JamKazam, we have been using Jamulus once or twice a...
  7. Kieran Clifford

    Best Converter for Roland GK-3B

    Hey there everyone. So I just acquired a GK-3B and a GI-20 that I put on my Warwick 6 string Corvette. The GK-3B works well and I have it within the recommended spec by Roland. The only problem is the GI-20 is pretty slow in terms of tracking. I know about the cycles per second and how the B...
  8. Clemouze

    How to generate latency in live situation?

    Salut all I am using a MOOER Radar pedal out of the line out of my amp head. Super cool bass cab sim tone (taken from my own cab ) I like using it to play with headphones, to record or in live situation to go to FOH. BUT In the two last cases I also like to take the DI pre-EQ from my amp...
  9. TuneSalad666

    Surprised by how well the Sub'n'Up tracks and how low the latency is.

    So finally got time to check my setup with my relatively clean bass signal in one channel (only put to slight breakup on my tube preamp when I dig in hard) and then an octave up signal handled by the TC Electronic Sub'n'Up Mini followed by a Joyo Orange Juice set to mild overdrive and finishing...
  10. mpm32

    Latency When Using Tracks

    Our typical set-up involves our drummer running our tracks. He has a mixer; tracks go from the iPad to his mixer. He gets a direct feed from the mixer with track and click to his IEMs and sends another line with the track to the board which feeds our IEM mixes. At our last gig we had to do...
  11. Badmuthaplucka

    Low latency pitch to MIDI finally here!?!

    No bass unit as of yet but this is very promising! And may even be very affordable!
  12. younggun

    Bass guitar as midi control- Latency solution: FretTrax or Wilcox Hex FX

    I currently have a bass set up with a Roland GK-3B pickup that I use for outputting to a Roland GR-55 and also some synth modules. This set-up works decently, but not perfectly for midi output. There are issues with latency in the lower note ranges, and also some lesser issues with harmonics...
  13. EduUY

    I-RIG latency

    Do you know, if i plug my bass with IRIG will i hear the delay or latency normally expected when you directly plug your instrument in pc or it solves the latency problem with normal pc?
  14. hurstp37

    Focusrite to Garageband latency madness! argh

    Guys, I'm a rookie player and really enjoy playing my bass along to various drum tracks in Garageband (don't laugh), but after many many hours of trial and error, I still can't figure out for the life of me how to record a track that aligns with the drum track in GB. The latency/delay is the...
  15. project_c

    Lowest latency pitch shifter?

    Looking for a simple 'octave up' shifter, with as little latency as possible, but with a useable sound. Anything I'm doing through plug-ins is giving me very noticeable latency so I'm wondering if hardware is the way to go.
  16. JosephRose

    Which Octave Up pedal has the least latency?

    Which Octave Up pedal has the least latency? Right now I have the Micro Pog and it is too slow. I need less latency. Every other aspect is secondary to the latency.
  17. T

    Daah! It was latency all along

    This is a tale of ignorance, lack of faith in one's abilities, and self-deception. Back in the analog recording days, I always felt that my timing was solid. A few years back, I started recording with a digital interface, and realized my timing wasn’t as good as I thought. The recordings were...
  18. 3_socks

    Zero latency OCTAVE UP pedal help

    Good Day, fellow low-enders. Lots of videos online for various popular and recommended bass octave pedals. I'm only interested in owning a pedal that can make all strings "octave up" more than once, but somehow sound as if it's the same bass. I don't live near an outlet where I can test and...
  19. Chirro

    Does anybody know latency of ZOOM MS-60B and B3?

    Hello everybody. I'm going to chain some digital devices and the sum of the latency of each one is important to me. I have written to Zoom USA and Zoom Japan some days ago asking this, and no response at the moment. I need to know the latency of multistomp Zoom MS-60B pedal (and B3 if it's...
  20. kesslari

    HELP! Latency issue - Focusrite Scarlett Solo and Audacity

    Oh Gurus of Recorded Sounds... I'm trying to record a bass track for a friend. I have opened his recording as a 2 channel file in Audacity. I have my Scarlett Solo hooked up. But when I record, the part I play is several milliseconds delayed from the main track. I've used this setup before...
  21. Zvonimir

    Latency workaround?

    Hello. So after taking a few blind tests, I realized that I don't need mic-ed bass and DI is just fine. So I got a nice interface (Fast Track C600) and plugged my bass to record. The "Latency" is the new terminology I learn. OK, google... Got it. ASIO! But whatever tweaks I try, that echo is...
  22. Downunderwonder

    Distance to your amp plus wireless latency = unacceptable delay?

    [Invalid or Expired Link Removed] I have nil experience with roaming large stages. Only a few times I have been positioned 15 to 20ft from my cab and I felt my timing was affected trying to lock in with drums. This tallies with what the author of the article experienced. Mathematically you can...
  23. V

    Problem with Focusrite 2i2

    Hey guys, I bought this Invalid Link Removed audio interface yesterday but had the chance to check it out today. I bought a Invalid Link Removed along with it to record guitar. I mostly record bass and wanted to test it. Recording it alone was great, but once i played along a song/track I...